server 2k3 choose btw 2 Internet acces

Hello,
may be very easy for some of you..but for me ..

here's my situation:
server 2k3 192.168.123.3;
2 NICs: NIC1 NIC2
1 DHCP 192.168.123.xxx
2 Internet Acces Provider: IAP1 & IAP2
2 modem Miap1 Miap2
1 Router (192.168.123.1)

server IP config:
NIC1
IP 192.168.123.3
255 255 255 0
gateway 192.168.123.1

server is connected wiht NIC1 To my router;
router is connected to the Miap1 with the port WAN and make the translation.

My Goal:
Have IAP1 & IPA2 available for all my network

May be working with "route add" to formward some specifics requests;
may be buying a certain type of router that could manage two IAP..
I don't know how to optimalize my infra..

many thanks in advance for your ideas

Frederic ( From Belgium)
.

Relevant Pages

  • Re: SBS 2003 Misconfigured?
    ... I've thrown quite a bit at them, and just have to disagree that they are inherently less secure than the netgear. ... setup DHCP and I have also gone in and manually created a new scope ... when I first used the Netgear router with SBS 2003, ... than one SBS server in a company makes no sense. ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot connect to RWW from home PC
    ... eth0 172.26.0.1/16 Extra none ... That would be the address you need a DNS record for. ... One question - if I reset the Thomson Router will that clear all the ... Heres' the info for our server: ...
    (microsoft.public.windows.server.sbs)
  • Re: NLB Cluster - Ping fails or long time to reply from outside local subnet - SOLVED
    ... Windows Server 2008 Readiness Team ... I was feeling nervous about our teaming-capable adapter as I read it might be sending out heartbeats, so I disabled it AND configured the cluster on a separate DLink card in multicast mode. ... I am losing the plot with NLB, I have spent a week trying to get it working. ... I thought that the litmus test was that the router functions fine when no NLB is installed, but when it is, things start going screwy. ...
    (microsoft.public.windows.server.clustering)
  • Re: Cannot connect to RWW from home PC
    ... That would be the address you need a DNS record for. ... You say "And in the router you need to forward to your external nic IP" ... Still can't telnet to any of your ports at your public ip address. ... Heres' the info for our server: ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 Misconfigured?
    ... Yeah, maybe it's not that different from the Netgear, for all that. ... that when I first used the Netgear router with SBS 2003, ... tech spend 4+ hours on my system, and then tell me to enable DHCP ... more than one SBS server in a company makes no sense. ...
    (microsoft.public.windows.server.sbs)