Re: DHCP IPv& Win2008
- From: Meinolf Weber <meiweb(nospam)@gmx.de>
- Date: Sun, 21 Sep 2008 18:05:03 +0000 (UTC)
Hello II,
See here about the flags:
http://technet.microsoft.com/en-us/magazine/cc162485.aspx
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Thanks a lot!
the network is only IPv6 mode.
I've configured DHCP anche authorized it in AD.
I've enabled managedaddress but the dhcp cannot be leased.
i've one question...with statefull dhcp server is neccessary a router
than
manage O and M flag for release DHCPv6 address?
i try to configure dhcpv6 and client with ipv6 with virtual machine
VMware.
"Meinolf Weber" wrote:
Hello II,
Is the DHCP server authorized in AD?
Do you have a full IPv6 network or also some IPv4 machines?
Have you "managed address configuration" on your client enabled? You
can do it with this command:
netsh interface ipv6 set interface "interface name "
managedaddress=enabled advertise=enabled
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
hello;
i0ve installed a primary DC 2008 with dhcp in statefull mode. the
ipv6 of server is fec0:0:fffe::1
i've more client with ipv6 in dhcp mode, but the address cannot be
acquired...
any help?
.
- References:
- Re: DHCP IPv& Win2008
- From: II
- Re: DHCP IPv& Win2008
- Prev by Date: Re: RRAS server separating two subnets - one subnet cannot reach the Internet and computers can't ping each other between subnets
- Next by Date: Re: Joining remote computer to a domain
- Previous by thread: Re: DHCP IPv& Win2008
- Next by thread: Routing multiple domains to 1 mail server
- Index(es):
Relevant Pages
|
