RRAS NAT Block Outgoing Port?

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Mio <MioTheGreat@xxxxxxxxx>
Date: Fri, 15 Aug 2008 07:59:40 -0700 (PDT)

I have RRAS running a NAT server. How can I configure it to block
outgoing connections on a specific port (In this case: 25) from all
computers on the network except for the RRAS server itself?
.

Follow-Ups:
- Re: RRAS NAT Block Outgoing Port?
  - From: Robert L. \(MS-MVP\)

Prev by Date: Re: Connect two office building's network together
Next by Date: Re: Connect two office building's network together
Previous by thread: Connecting a network share
Next by thread: Re: RRAS NAT Block Outgoing Port?
Index(es):
- Date
- Thread

Relevant Pages

Re: nmap shows open UDP port 113
... the NAT server by using nmap -sS NAT, as you mentioned it has 113 port ... knowing that we have at least one port accepting ... or even better Nmap -sI NAT:NATLOCAL ... > techniques from a world-class research group. ...
(Pen-Test)
Re: Systems behind NAT - port scanning etc.
... > addressed systems accessing the internet via a NAT server, ... > possible to port scan or attempt to enumerate the privately addressed ... > i.e. if you could establish the IP of the NAT server and a currently ... > assigned translated port number, will the NAT server pass traffic ...
(comp.security.firewalls)
Re: NAT cant port mapping to internal website
... If I try telnet port 25 on my NAT server, ... > The client can connect to internet via my NAT. ...
(microsoft.public.windows.server.networking)