Re: Need help with Multiple DHCP Scopes

I am not sure I understand the situation. If "only allows the second network to connect to the server and not the internet", make sure route 192.168.2.x only.
--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Tom" <Tom@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:033DA981-56A2-4B96-984D-686FB9F9C2A9@xxxxxxxxxxxxxxxx
Hello,
We currently have 2 networks. One is serviced by a Windows 2008 Server that
is running DHCP and assigning this range of addresses:
192.168.1.x
255.255.255.0
192.168.1.1
The second network has a Windows 2003 Server that is running DHCP that
assigns this range of addresses:
192.168.2.x
255.255.255.0
192.168.2.1
We would like to remove the second domain and merge it with the first, yet
we have more clients than 1 DHCP server can service. We have many static
addresses assigned in both locations (printers, WAP, etc.) so I'd like to
continue using these two ranges of addresses. Can 1 DHCP server do that? We
have a content filter that must be installed between the router and the
network and so I'm not sure how to connect the networks via routers. What
are my options? I have tried to configure a SuperScope that has the second
range of addresses and then added the second range IP address to the servers
nic, but that only allows the second network to connect to the server and not
the internet. As you can tell, I need help.
Thanks for any that you can provide.
Tom

.

Relevant Pages

  • Re: Outgoing POP3 email missing/lost/not received
    ... ISP's mail server instead of the domain name on the ... SUMMARY OF SETTINGS FOR CONFIGURE E-MAIL AND INTERNET ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Connect the SBS to a remote IIS for Internet Printing
    ... the server can access the Internet with no problems at all. ... Checking network connection, and after a few seconds it says The ... the problem is cause by the configuration of ISA. ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA 2006 Basic Configuration
    ... Why would we point Preferred DNS to itself? ... Configuring the Internal Network Interface ... In the Internet Protocol Properties dialog box, ... Select the Use the following DNS server addresses option. ...
    (microsoft.public.isa.configuration)
  • Re: One computer on 2 networks
    ... On the server take the new "internet Nic" and set it up properly for the ... Create a static route in the OS's routing table that uses the LAN Router ... don't work in the Network Admin Dept. I'm a developer. ...
    (microsoft.public.windows.server.networking)
  • Re: SBS 2003 (no SP) - file saving over network suddenly very slow
    ... > resources turn to be slow in SBS 2003 environment. ... > the SBS server box? ... > Norton Internet Security, Norton System Works, and Norton Anti-Virus etc. ... > II Please ensure proper binding order of the network adapter cards. ...
    (microsoft.public.windows.server.sbs)