I'm trying to trace down some sluggishness in our network and see what ports
are in use and activity etc.. using Ethereal and other tools..
Is it true.. that the best way is to plug a laptop into a hub (vs a switch),
which actually would sit outside the firewall.. in between the router and the
cable modem (internet)?
Re: 2 pc network - cant see host files from pc 2 on pc 1 ... Assuming that you have firewall protection via your internet router try ... workgroup because it will be needed for the network to work correctly. ... see if you can access TCP ports 139 and 445 on computer one of which at ...permissions.... (microsoft.public.windowsxp.security_admin)
Re: PC Tools Firewall Question ... So, it's to be assumed that the two machines that are connected to your router, the LAN or Local Area Network, are never to share resources or network between the two, which are the ports you're blocking below with the PFW.... (comp.security.firewalls)
Re: Setting up Remote Desktop web connection in winxp mce to work ... Its possible her office network admins are blocking the outgoing ports.... Also check to see your using the correct public IP for your router and make sure the router is configured to disable remote management.... > anyway to test the remote connection, other than trying to connection> from ... (microsoft.public.windowsxp.work_remotely)
Re: How to spoof MAC-address in SuSE Linux? ... > that in their contracts and they threatened the customers and stuff. ... ran more then one PC on the network while it was not allowed to do so. ... Here there are several providers that close all ports till 1024 and some ...support you think you are going to get is gone. ... (alt.os.linux.suse)
Re: "Invalid Connection Data" Message XBOX 360 acting as an MCE ... This posting is provided "AS IS" with no warranties, and confers no rights. ... have some ideas on what I should look for on this network issue. ... I have reviewed your trace.... (microsoft.public.windows.mediacenter)
