DCHP VLans and Private network.

I am not completely new to DHCP, but it is not something I deal with every
day. I have a complicated issue, and am hoping someone can help;
This is the setup;

x.x.125.128/27----NIC1-----DHCP Server---NIC2----10.4.10.x/24
|
Scope's x.x.125.1/25
Scope's x.x.125.128/27
Scope's x.x.125.160/27
Scope's 10.4.10.1/24


How do I tell the server to hand out addresses in x.x.125.1/27 and
x.x.125.160/27. Will I need relay agents for this?
Also, in the past I have had the DHCP server hand out addresses on the wrong
interface (giving a 10.4.10.x addresses on the x.x125.18/27 NIC1 interface)
Why, and is there a configuration setting I am missing to force the correct
NIC to be used?

Thanks in advance :)

.

Relevant Pages

  • Re: DHCP
    ... All the info I have in the DHCP options is correct. ... though maybe I was missing an option in my scope or something. ... It all worked great until I moved the Web server to ...
    (microsoft.public.windows.server.networking)
  • Straight-thru or crossover?
    ... roam from the house to the yard to the garage. ... a different IP and DHCP is disabled. ... Am I missing anything? ...
    (alt.internet.wireless)
  • Re: Setting a static IP.
    ... I may be missing the point of what you are trying to ask, ... like you want any devices on LAN1 to have a static IP. ... Unless you have DNS or other service information you are using DHCP to ...
    (comp.dcom.sys.cisco)
  • Re: Setting a static IP.
    ... I may be missing the point of what you are trying to ask, ... like you want any devices on LAN1 to have a static IP. ... Unless you have DNS or other service information you are using DHCP to ...
    (comp.dcom.sys.cisco)
  • Re: dns on win2000
    ... Sounds like your missing some critical part when entering the static IP. ... would compare it to the DHCP address and see what is missing. ...
    (microsoft.public.win2000.dns)
Loading