Re: PXE boot from a RIS server

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance


I do not have option 60 to choose from. i found that answer somewhere else
also and it said something about reinstalling it from a RDP cd if if it
wasn't there. How do I get option 60?
"Mathieu CHATEAU" wrote:

you may check this:

PXE clients computers do not start when you configure the Dynamic Host
Configuration Protocol server to use options 60, 66, 67
http://support.microsoft.com/kb/259670/en-us


--
Cordialement,
Mathieu CHATEAU
English blog: http://lordoftheping.blogspot.com
French blog: http://www.lotp.fr


"rocker40" <rocker40@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:3096590E-C3D1-41EA-889F-9B4E64A9B3DF@xxxxxxxxxxxxxxxx
Actually I got the DHCP to work I think. My media was bad. but now the
next
step it is saying "no boot filename received" I created the RIS and it
created the shared file and boot folder I think. I created it using the
instructions from the same link you sent me.
Any ideas?

"Mathieu CHATEAU" wrote:

Hello,

any eventlog on the dhcp/ris server ?
Is the RIS server multihomed ?
Did you authorize the RIS in AD ?

How To Use Remote Installation Service to Install Windows Server 2003 on
Remote Computers
http://support.microsoft.com/kb/325862/en-us

Description of PXE Interaction Among PXE Client, DHCP, and RIS Server
http://support.microsoft.com/kb/244036/en-us




--
Cordialement,
Mathieu CHATEAU
English blog: http://lordoftheping.blogspot.com
French blog: http://www.lotp.fr


"rocker40" <rocker40@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:123CA233-CC1D-4B07-A68C-E14B27E57EFD@xxxxxxxxxxxxxxxx
I have installed a RIS server and have a DHCP server running now with a
few
IP's for it. I have th server ruuning and when I go to boot from PXE
(from
the network card) it starts to boot from there but than gives me this
error.
'No DHCP or ProxyDHCP offers made"
Any ideas?
Thanks




.

Relevant Pages

  • Re: PXE boot from a RIS server
    ... How To Set Up and Configure Remote Installation Services in Windows 2000 ... English blog: http://lordoftheping.blogspot.com ... Configuration Protocol server to use options 60, 66, 67 ... >> Description of PXE Interaction Among PXE Client, DHCP, and RIS Server ...
    (microsoft.public.windows.server.networking)
  • Re: PXE boot and transfer image from an XP Pro PC
    ... Unfortunately our XPe image is close to 600MB. ... I am able to use a CDROM drive and boot up with a BartPE image on the CD and transfer the files, so I'm guessing that this RIS server is the way to go? ...
    (microsoft.public.windowsxp.embedded)
  • Re: PXE boot and transfer image from an XP Pro PC
    ... I get to step 6, "Locate the folder on the hard disk that contains the Windows PE build tools, denoted as build_version. ... I am able to use a CDROM drive and boot up with a BartPE image on the CD and transfer the files, so I'm guessing that this RIS server is the way to go? ...
    (microsoft.public.windowsxp.embedded)
  • Re: RIS Problem
    ... The RIS server is in the same subnet as the ... I've not yet been successful setting up a client, ... When trying to boot from the PXE boot floppy or by pushing ...
    (microsoft.public.win2000.setup_deployment)
  • Re: Boot Disk cant find Server
    ... The ris server checks out ok ... machine is running both dhcp as well as ris. ... images to the server but can't use the boot disk to put a ... >Is the RIS Server uathorized? ...
    (microsoft.public.win2000.setup_deployment)