Re: win2003 domain controller and NAT networking problem, help!!
- From: wenxueman <wenxueman@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Sat, 29 Dec 2007 02:17:00 -0800
Hi Robert,
Thanks for your reply. I tried to change the gateway, but it seems not the
case. But I found another issue. I can ping external ip address from my
client laptop. That means I can browse internet by ip not domain name. So I
doubt I use the wrong DNS. At the moment, I use DHCP to assign IP to my
client laptop and it gains IP and DNS setting automatically. The DNS which my
client laptop using is the DNS istalled in my WIN 2003 server. So How can I
change the setting to make the client access internet?
Many thanks
"Robert L. (MS-MVP)" wrote:
We have some issues with this settings. You should not have two default.
gateways. So, just use Default Gateway . . . . . . . . . : 82.152.192.1 and
no 192.168.0.1 as gateway.
Also have you enabled the IP routing? These search results may help too.
issues of a multihomed computer with two NICs
Removing the LAN default gateway 192.168.0.1 fixed the problem. Case
2: The XP Pro with two NICs, one for the Internet access and another one for
accessing ...
www.chicagotech.net/Routers/2gateway2.htm - Similar pages
Routing
Default Gateway: 192.168.0.1. Don't add default gateway across
disjoining networks. Multihomed with two gateways may cause a connectivity
problem ...
www.chicagotech.net/routing.htm
--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"wenxueman" <wenxueman@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:CC1A8A53-3BFE-473C-8841-169F1412AA74@xxxxxxxxxxxxxxxx
Hi experts,
I have tried to fixed this problem over last 3 weeks, but I still failed.
Please give me some help or some advice.
I try to set up a SOHO network at home. The network devices and computers
are as follows:
SpeedTouch usb modem
Win 2003 server, domain controller and NAT enabled.
LinkSys wireless router
My laptop
The SpeedTouch usb modem connect to the telephone line which access
internet(ISP dynamically assigns IP).
My win2003 server connects to the SpeedTouch usb modem. Win2003 server can
access internet. My win2003 server only has one NIC which connects to the
router. I use the router as a hub.That means I switch off the route and
DHCP
functions.
My laptop connects to the router wirelessly.
I intalled the DHCP server in the win2003, so my laptop can get ip
dynamically. I also installed domain controller in my win2003. My laptop
is a
member of my domain. I can logon my laptop from domain. I enable the
remote
desktop on my win2003 server. So I could be able to logon win2003 server
from
my laptop.
I enabled the NAT in the RRAS and set up a demand-dial which can set up a
connection to internet.
The problem is my client laptop can not access internet.
Win2003 ip is 192.168.0.1
ipconfig results as follows:
PPP adapter RAS Server (Dial In) Interface:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
PPP adapter Remote Router:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 82.152.196.241
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 82.152.192.1
My client laptop ip is 192.168.0.11
ipconfig result as follows:
Windows IP Configuration
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . : startmandarin.com
IP Address. . . . . . . . . . . . : 192.168.0.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
Win2003 RRAS remote router IP routing table
Destination,Network mask,Gateway,Interface,Metric,Protocol
0.0.0.0,0.0.0.0,82.152.192.1,Remote Router,1,Static
0.0.0.0,0.0.0.0,192.168.0.1,Local Area Connection,20,Network management
82.152.192.1,255.255.255.255,82.152.196.241,Remote Router,1,Network
management
82.152.196.241,255.255.255.255,127.0.0.1,Loopback,50,Local
82.255.255.255,255.255.255.255,82.152.196.241,Remote Router,50,Local
127.0.0.0,255.0.0.0,127.0.0.1,Loopback,1,Local
127.0.0.1,255.255.255.255,127.0.0.1,Loopback,1,Local
192.168.0.0,255.255.255.0,192.168.0.1,Local Area Connection,20,Local
192.168.0.1,255.255.255.255,127.0.0.1,Loopback,20,Local
192.168.0.10,255.255.255.255,127.0.0.1,Loopback,50,Local
192.168.0.255,255.255.255.255,192.168.0.1,Local Area Connection,20,Local
224.0.0.0,240.0.0.0,82.152.196.241,Remote Router,1,Network management
224.0.0.0,240.0.0.0,192.168.0.1,Local Area Connection,20,Local
224.0.0.0,240.0.0.0,82.152.196.241,Remote Router,50,Local
255.255.255.255,255.255.255.255,192.168.0.1,Remote Router,1,Local
Thanks
- Follow-Ups:
- Re: win2003 domain controller and NAT networking problem, help!!
- From: Thorsten Kampe
- Re: win2003 domain controller and NAT networking problem, help!!
- References:
- win2003 domain controller and NAT networking problem, help!!
- From: wenxueman
- Re: win2003 domain controller and NAT networking problem, help!!
- From: Robert L. \(MS-MVP\)
- win2003 domain controller and NAT networking problem, help!!
- Prev by Date: RE: domain wide password change
- Next by Date: Windows 2000 Server - Problems getting internet to clients
- Previous by thread: Re: win2003 domain controller and NAT networking problem, help!!
- Next by thread: Re: win2003 domain controller and NAT networking problem, help!!
- Index(es):
Relevant Pages
|
Loading