Re: how to configure RRas..... please help me..

On 12 Dic, 23:14, "Bill Grant" <not.available@online> wrote:
First thing to do is remove the default gateway from the second NIC. You
can only have one default gateway per machine, not one per interface.

There is not enough info here to see how routing will work. You cannot
ensure routing between the subnets simply by making changes on this router.
It depends on the default gateway settings on the client machines and also
on the routes on any other routers in the network. In your case, you will
almost certainly need extra routing on the router at 10.203.75.90 to get
this working.

Here is an example of a config that will work.

router
10.203.75.90 static route
| 192.168.2.0 255.255.255.0 10.203.75.89
|
LAN machines
10.203.75.x dg 10.203.75.90
|
10.203.75.89 dg 10.203.75.90
RRAS
192.168.2.10 dg blank
|
LAN machines
192.168.2.x dg 192.168.2.10

You do not need any static routes on the RRAS router.

I try to do what you sudgest to me... but unfortunately it doesn't
work...

I explain better:

I have a server with 2 lan card on it and 2 different network:

the first is 10.203.75.64 sub 255.255.255.224 and gateway 10.203.75.90
(a firewall)
the second 192.168.2.0 sub 255.255.255.0 an gateway 192.168.2.254 (a
router)

I can only change the configuration of the firewall (10.203.75.90)...

the specific IP adresses of the server are : 10.203.75.89 and
192.168.2.10

I would like to print to a printer (10.203.75.94) and find a shared
directory on a pc (10.203.75.85), from the 192.168.2.x network.....

I have activated the RRAS on the server, and add the 2 lan card...
no static rout added on the RRAS
2 lan card on the RIP protocol....

what else????????

please help me .....

best regards

Vit
.

Relevant Pages

  • Re: 2000 Server as Router
    ... How to Configure Windows server to Be a Router ... To setup Windows 2000/2003 as a router for a LAN, you need to two network ... To enable LAN routing. ...
    (microsoft.public.win2000.ras_routing)
  • Re: Configuration of VPN solutions behind NAT
    ... You need to do more than just enable IP routing. ... that the traffic actually reaches the router. ... If your LAN uses some other ... subnet traffic to the RRAS router. ...
    (microsoft.public.win2000.ras_routing)
  • Re: Windows Routing can ping but cant see windows shares
    ... The machines in the 10.1.5 subnet have their default gateway set to ... it by using the RRAS router, not the Internet router. ... > main LAN ...
    (microsoft.public.windows.server.networking)
  • Re: old Notebook as firewall Qs
    ... which would then run into my Linksys router and service the rest ... >> machines are connected to it. ... >>> should be loaded with Linux and the approprite firewall software. ... >> provides protection from the WAN for the LAN? ...
    (comp.security.firewalls)
  • Re: Two NICS - Windows XP - I dont want any traffic between them
    ... Tips on the routing would be helpful too. ... I have a network card connected to an unmanaged switch that the ... > static route on the LAN router so that it knows where the where to send ... Move the LAN NIC to the top of binding order. ...
    (microsoft.public.windowsxp.network_web)
Loading