Use of Multiple Public IP Addresses
- From: Bob Felton <bob123.removethis@xxxxxxxxxxxxx>
- Date: Fri, 26 Oct 2007 15:07:57 -0700
Our ISP is providing us two public IP addresses over our full T1
connection. One is being used by our Linksys router (directly
connected to the T1 "modem". I would like to utilize the second
public IP address to allow VPN connections to our Windows Server 2003
R2 SP2 based network by adding a second NIC card to the server and
assigning it the second public IP address. Do I simply break the
current connection between the T1 modem and Linksy router, connect the
modem to a switch, and then connect the router to one switch port and
the second NIC to another switch port? Thanks.
--
Bob Felton
.
- Follow-Ups:
- Re: Use of Multiple Public IP Addresses
- From: Bob Felton
- Re: Use of Multiple Public IP Addresses
- From: Bill Grant
- Re: Use of Multiple Public IP Addresses
- Prev by Date: Re: Cannot find Domain Controler
- Next by Date: Re: Cannot find Domain Controler
- Previous by thread: Re: Bridging two nics on SBS 2003
- Next by thread: Re: Use of Multiple Public IP Addresses
- Index(es):
Relevant Pages
|
