Re: Win2k3 Server restarting - LsaSrv 5000

The problem was sorted out after roconfiguring my VPN server from 'basic
VPN' to 'VPN-NAT'. But I am unable to access the server using 'Remote
Desktop Connection' when VPN-NAT is configured. What should I do to be able
to access the server via RDC?

Regards,
Garry

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb665b3538c9cfce1ebd0873@xxxxxxxxxxxxxxxxxxxxxxx
Hello Garry,

BTW which service pack do you use?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.

Hi,

I have reformatted the server but still im still getting the same
problem. The event ID below is no longer present in the event viewer
but it is still restarting when a user connects to the VPN.

Time: 1:47:20PM
Type: Error
Source: WMIxWDM
Event ID: 107
Description:
"Machine Check Event reported is a fatal error.
These is what I get in the event before the restart:

Event ID: 1074
Source: USER32
Description:
The process winlogon.exe has initiated the restart of computer
<<servername>> on behalf of user for the following reason: No title
for this
reason could be found:
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\WINDOWS\system32\lsass.exe' terminated
unexpectedly with status code: 1073740972. The system will now
shutdown and
restart.
I have re-applied the hotfix but it dindt help to fix the problem.

Please help. I'm really spending too much time already on this
problem.

Regards,
Garry
"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb66599d98c9ccb3496f847a@xxxxxxxxxxxxxxxxxxxxxxx
Hello Garry,

Check out this article:
http://support.microsoft.com/kb/889249
Seems theire is a hardware error with the processor.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
Here's an event thread of the previous shutdown,:

Time: 1:47:20PM
Type: Error
Source: WMIxWDM
Event ID: 107
Description:
"Machine Check Event reported is a fatal error.
Time: 1:49:35 PM
Type: Information
Source: USER32
Event ID: 1074
Description:
"The prrocess winlogon.exe has initiated the restart of
computer.....etc.."
Time: 1:51:09 PM
Type: Error
Source: EventLog
Event ID: 6008
Description:
"The previous system shutdown at 1:50:25PM on 9/24/2007 was
unexpected."
Regards,
Garry
"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb66599af8c9cca4e7ab330a@xxxxxxxxxxxxxxxxxxxxxxx
Hello Garry,

Can you see additional entrys in the event viewer except the
unexpected reboot?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties,
and
confers no rights.
Hi Meinolf,

The server restarted again after 2 days. Now it restarts whenever
a remote user connects to via VPN.

Please help.

Regards,
Garry
"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb66587788c9ca515fc870f1@xxxxxxxxxxxxxxxxxxxxxxx
Hello Garry,

see inline

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties,
and
confers no rights.
Hi all,

Our win2k3 with VPN server works perfectly until we decided to
install a separate broadband line to cater the VPN access.
Now, it restarts by itself randomly and we get these in the
event log:

Source: LsaSrv
Event ID: 5000
"The security package NTLM generated an exception. The
exception
information is the data."
followed by,
http://support.microsoft.com/kb/838656

Source: USER32
Ivent ID: 1074
"The prrocess winlogon.exe has initiated the restart of computer
<<servername>> on behalf of user for the following reason: No
title
for this
reason could be found.
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process C:|WINDOWS\System32\lsass.exe
terminated
unexpectedly with status code - 1073740972. The system will now
shutdown
and restart"
Previously the server has 1 NIC that connects to the router, it
serves
both local and remote users perfectly.
Now, we have installed additional NIC to handle the other
broadband
line for VPN access. that's when the problem started.
Did you check that you have the correct and new drivers for the
NIC?

Here's my

configuration:

NIC1 (connected to the router)
ip: 192.168.1.xxx
sm: 255.255.255.0
gw: none
NIC2 (connects directly to the broadband modem)
It has the IP address, Subnet Mask & Gateway given by our ISP.
Please help,
Thanks in advance,
Garry




.

Relevant Pages

  • Re: Remote Access and ISA Server in SBS 2003?
    ... I am glad to hear the Remote Access Wizard is working fine now. ... there is no difference in VPN between SBS 4.5 and SBS ... Error Message: VPN Connection Error 800: Unable to Establish Connection ... the external NIC of the SBS Server. ...
    (microsoft.public.windows.server.sbs)
  • RE: SBS 2003 sudden services problem over router based vpn
    ... I understand that your remote cannot receive POP3 emails through VPN ... SBS Server through routers. ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN clients unable to connect to other resources.
    ... gateway matches the IP of the remote client, and DNS and WINS point to the ... remote (although it takes close to a minute to connect, ... This is just regular Windows VPN, ... VPN server, remote routing and access running on the SBS 2003 server ...
    (microsoft.public.windows.server.sbs)
  • RE: Remote connectivity problems
    ... do you mean you have added a remote client to SBS ... If you have hardware VPN tunnel setup using Linksys or others, ... In this scenario you have to configure the SBS Server computer to enable ...
    (microsoft.public.windows.server.sbs)
  • Re: Connecting a remote workstation to a domain
    ... If you have more than a couple of remote workstations connecting to the SBS ... server via VPN, you really need to consider a Terminal Server in the main ... "Log in using a dial up connection" checkbox, ... roaming profile then synchronizes with the server over the VPN); ...
    (microsoft.public.windows.server.sbs)