Re: How to enable communication between Two different lans (subnets)/ domains 2003 server based? Assistance?

On Sep 17, 3:48 pm, "Phillip Windell" <philwind...@xxxxxxxxxxx> wrote:
"markm75" <markm...@xxxxxxx> wrote in message

news:1189821788.173041.154900@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

The symantec gateway router's ip address is 192.168.100.1.
Destination IP: (for this i have 192.168.227.0)
Netmask: the usual
Gateway: 192.168.227.6
Interface: I chose internal lan, but there is also wan1, wan2
available (internet side i guess)
Metric: 0

So this setting isnt correct?

No. It is not

Since you won't tell us what the IP#s are on the *ALL* the involved devices,
I cannot tell you the correct answer.

I have given all the ips involved, well mostly... which ones do you
feel are missing?


The symantec gateway router's ip address is 192.168.100.1 = internal LAN.
Destination IP: 192.168.227.0
Netmask: the usual
Gateway: 192.168.100.???????
^here i'm puzzled as to why it would be 192.168.100.1 as this address
is the gateway where I'm configuring the static route, hence
previously and currently i have it set to 192.168.227.6 (the RRAS
server on the virutal LAN).. the gateway on the other lan is
192.168.100.1 (the symantec router)..

Confused here, unless it really should be 192.168.100.1 (the gateway
of the device itself).
If so thats an easy fix which i can test at some point.

Interface: internal lan
Metric: <probably "1">

--
Phillip Windellwww.wandtv.com

The views expressed, are my own and not those of my employer, or Microsoft,
or anyone else associated with me, including my cats.
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processinghttp://www.isaserver.org/articles/ISA2004_AccessRules.html

Troubleshooting Client Authentication on Access Rules in ISA Server 2004http://download.microsoft.com/download/9/1/8/918ed2d3-71d0-40ed-8e6d-...

Microsoft Internet Security & Acceleration Server: Partnershttp://www.microsoft.com/isaserver/partners/default.asp

Microsoft ISA Server Partners: Partner Hardware Solutionshttp://www.microsoft.com/forefront/edgesecurity/partners/hardwarepart...
-----------------------------------------------------


.

Relevant Pages

  • Connection reset
    ... scp tranfer a iso file into the internal LAN of the second ... But if the scp file transfer started from winscp of ... the first gateway into the internal LAN of the second gateway, ... gateway from this windows using winscp. ...
    (comp.security.ssh)
  • Re: WAN LAN 2 Nics
    ... On the client machines set default gateway to ... the public gateway 68.153.xxx.xxx ... > internal lan can connect to server and internet. ...
    (microsoft.public.windows.server.networking)
  • Re: How to enable communication between Two different lans (subnets)/ domains 2003 server based? Ass
    ... Netmask: the usual ... Interface: I chose internal lan, but there is also wan1, wan2 ... The symantec gateway router's ip address is 192.168.100.1 = internal LAN. ...
    (microsoft.public.windows.server.networking)
  • Re: [SLE] 2 nics an gateway address
    ... you don't have more specific route for packet to be ... gateway pointing to say Internet (specific next hop IP ... I two nics in my linux ... > default gateway setup an there fore the internal lan ...
    (SuSE)
  • Proxy chain loop errors
    ... ISA Server detected a proxy chain loop. ... have 2 external network cards that both have gateway settings. ... Windows does support multiple gateways and does dead gateway detection. ... it doesn't really matter since both NICs send the packets out. ...
    (microsoft.public.isa)