Re: Newbie Question on how one domain can talk to a workgroup

As Mathieu said, you cannot ping from one IP subnet to another without
an IP router.

You actually have more problems here than you have yet discovered.
Setting up a domain is not a trivial thing an it can cause unexpected things
to happen.

I would recommend that you put your domain controller on the internal
virtual network which virtual server has. You will not be able to connect to
the physical network from there, and that is a good thing! To test that your
domain works properly, set up another virtual machine with a client OS and
link it to the internal network as well.

The safest way to give you virtual network access to the physical
network is to run a virtual machine as a NAT router between the virtual and
physical networks.

"Mathieu CHATEAU" <gollum123@xxxxxxx> wrote in message
news:OLfEyWc5HHA.1212@xxxxxxxxxxxxxxxxxxxxxxx
hello,

they have to be on the same subnet.
but your virtual server in 192.X.X.X too

This is routing/network related, not domain/workgroup related

--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com


"ianwr" <ianwrigglesworth@xxxxxxxxxxx> wrote in message
news:1187896120.837232.255190@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi,

Sorry if this is a very easy question, i'm not too hot on networking
and have been playing around with Virtual Server. The problem i have
is that i have a home network on a 192.x.x.x workgroup and this is
where my router is attached.

I have setup a virtual server domain unfer the IP address range
10.10.10.x.

I can't ping the virtual server DC from my home workgroup and vice-
versa. Is there a way to somehow allow them to see each other on the
network?

Thanks for all your help in advance

Ian.




.

Relevant Pages

  • Re: Windows firewall in 2 node 2K3 Cluster
    ... I placed a hosts file entry on each node for the virtual server name to ... cluster administrator functioned normally on both ... I did set the HB network for only Private and the public network as Public ...
    (microsoft.public.windows.server.clustering)
  • Re: OWA prompts for login multiple times when accessing over secon
    ... but you can't specify the HTTP Virtual Server IP ... Primary network adapter on internal network ... When I access OWA on the server itself I am prompted once for login ... When I access OWA from my external network with the IP address of the ...
    (microsoft.public.exchange.admin)
  • Re: OWA prompts for login multiple times when accessing over secondary
    ... It is indeed set to all unassigned, and even if I specify the extneral adapter's IP the issue still exists. ... Correct me if I'm wrong, but you can't specify the HTTP Virtual Server IP within ESM, it's an IIS setting? ... Primary network adapter on internal network ... When I access OWA on the server itself I am prompted once for login ...
    (microsoft.public.exchange.admin)
  • Re: Windows firewall in 2 node 2K3 Cluster
    ... I did set the HB network for only Private and the public network as Public ... Node1 took over the cluster resource as it should and I was still ... able to access the virtual server from a client. ...
    (microsoft.public.windows.server.clustering)
  • Re: Just an interesting note.
    ... The Linksys box is NAT'g for the internal network of 192.168.1.0/24. ... real router but an illusion. ... 192.168.1.0/24 subnet, the other NIC is on the 192.168.2.0/24 subnet connected to a different switch ...
    (alt.internet.wireless)