Re: Multiple NICs -- directing traffic to one or the other

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

This can be managed by creating two host names for each device, each with a
different host IP.

"Bill Grant" <not.available@online> wrote in message
news:%23HZgP134HHA.5212@xxxxxxxxxxxxxxxxxxxxxxx
As Mathieu said, the software will automatically know which card to use
once it knows the IP address of the target machine. The big problem with
multiple NICs is name resolution. If the name resolves to the "wrong" IP for
the target machine,the traffic will use the "wrong" NIC and the "wrong" path.

"Mathieu CHATEAU" <gollum123@xxxxxxx> wrote in message
news:%23GrIeo24HHA.2108@xxxxxxxxxxxxxxxxxxxxxxx
Hello,

Windows will use the good network card to reach the good network
automatically.

For the outside trafic (anything else than 192.168.100 and .105) it will use
the gateway through the card that has it defined
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com


<mdegroat@xxxxxxxxx> wrote in message
news:1187641852.756550.39140@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I'm implementing an iSCSI SAN. Right now I have a two seperate
networks for the SAN traffic and regular network traffic.

I have a Server 2003 R2 server with two NICs:

NIC1 is uses our standard network, 192.168.100.0/24
NIC2 is our SAN VLAN, 192.168.105.0/24

Is there anyway I can tell my Windows server to direct all traffic for
network for the .105 network to NIC2 and all other traffic to NIC1?






.

Relevant Pages

  • Re: Computer access to ACL
    ... You could grant access to the NETWORK entity, but that would give access to ... host A access to shared info on host C, but block everyone on host B" unless ... You users would need accounts that could be recognized ... by the sharing server, and server hosting the DFS, for them ...
    (microsoft.public.windows.server.security)
  • Re: making Samba work [Solved]
    ... > Microsoft uses 'domain' to describe a lan network topology interchangeably ... You can use in your LAN ... If you internally use the same mechanisms to resolve host names ... No DNS server needed then. ...
    (Fedora)
  • Re: Web Site Mystery
    ... host our own web site at this location. ... So in our DNS setup, there is a pointer to the ip address of the ... Run an ipconfig /all on your server and you'll see the ... www.europacrown.com don't work from our corporate network. ...
    (microsoft.public.windows.server.general)
  • Re: Web Site Mystery
    ... host our own web site at this location. ... So in our DNS setup, there is a pointer to the ip address of the ... Run an ipconfig /all on your server and you'll see ... www.europacrown.com don't work from our corporate network. ...
    (microsoft.public.windows.server.general)
  • RE: VMWARE on 2003 Server
    ... VMs on one server, and 1 VM on the other, and they are all talking to each ... Joe ... >>> is a special host network that only the VMs on that host and the host itself ...
    (microsoft.public.windows.server.networking)