Re: Disappearing DNS

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I dunno - my first thought was rogue dhcp server too. Turn it off on your server, and run tcpdump on one of your machines to monitor traffic for ports 67 and 68. If you see dhcp requests, and then see dhcp replies, you'll know you have a problem.

Another thing you could check is the IP address of the dhcp server when you're having the problem. Look at ipconfig /all for that information. If it's not what you expected, you'll know where to go.

grep

Paul wrote:
Hi, at first I thought it could be another DHCP server but it was giving out all the correct IP settings. I also disabled the DHCP server to see if anything else answered the request. I don't think the network monitor will help as the client receives the correct DNS settings but they then disappear completely - a /renew gets them back.

"Yann" <Yann@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:BBB4A66D-6859-43AB-9F18-8B1942DAFB7E@xxxxxxxxxxxxxxxx

What about a rogue DHCP server that would send incorrect informations? I
doubt it because you said the renewal time is 2 days.

Have you tried to use Microsoft Network Monitor on your XP clients and
filter on DHCP to see what could be wrong?

"Paul" wrote:

2 days

"Joshua Bolton" <JoshuaBolton@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:28F16A83-1780-41C4-8DF3-458B9867467A@xxxxxxxxxxxxxxxx
> What is the dhcp lease renewal interval set to?
>
> "Paul" wrote:
>
>> Hi, I have a weird problem. This morning some of our clients were >> having
>> problems accessing the internet. I investigated and found that they >> had
>> lost
>> there DNS settings which were assigned by a 2003 DHCP server. I did an
>> ipconfig/renew and they came back again.........but not for long! Some
>> clients seems to work ok now but there is still a number which only >> hold
>> onto there DNS settings for approx 20 - 40 minutes. They do not lose
>> their
>> own IP, WINS or gateway though. As a temporary workaround I have added
>> the
>> DNS server entries into there network connection. I have put procmon >> on a
>> machine and told it to filter on
>> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\

>> to see if I can find what is accessing the reg key but so far the >> machine
>> has been ok - typical!
>>
>> FYI the servers and clients have been rebooted recently after putting >> the
>> latest windows updates on.
>>
>> Any ideas?
>>
>>
>>
>>
.

Relevant Pages

  • Re: DDNS Issues
    ... not so much the DHCP server itself. ... the clients themselves can register directly with DNS instead of the DHCP ...
    (microsoft.public.windows.server.dns)
  • Re: Multiple PTR records wont go away in the reverse zone.
    ... What about the DHCP setting "Dynamically update DNS A and PTR records only ... if requested", so clients will specify. ... I do agree with all your DHCP server recommendations (especially entering ... there is no other reason for a client to register in DNS when off ...
    (microsoft.public.windows.server.dns)
  • Re: Change DNS Remotely.
    ... just can't seem to find a script or what to creat for a script. ... Then introduce a DHCP server to give those clients the new ... Use a script to change the DNS settings on each client to "Obtain the DNS ...
    (microsoft.public.windows.server.dns)
  • Re: SuSe10.0 - windowsXP networking problem !! plz help!!!!
    ... >>> The ADSL modem is a DHCP server, not a client one merely decided to ... >>> the ADSL modem, and ALL clients get assigned Local IP addresses by the ... >>> ports and some 16 WAN ports. ... >>it's DHCP server to pass out the default gateway parameter to the clients. ...
    (alt.os.linux.suse)
  • Re: Strange DHCP Problems
    ... clients which get incorrect subnet mask; maybe it's the hardware that causes ... try plugging 2-3 of the clients which get incorrect mask into a simple ... You can also use sniffer on different network segments between DHCP server ... > 2 months ago random clients began to get the wrong subnetmask. ...
    (microsoft.public.windows.server.networking)