Re: VPN Gateway

So, my RRASS is using DHCP wich is provided by DC of my lan(i configure as a
CHCP Relay Agent) and gives the correct address to my remote clients, and i
configure thit static route:

Interface: 192.168.0.27 (is the public interface)
Destination: 192.168.0.0
Network Mask: 255.255.255.255
Gateway: 192.168.0.1 (is my lan gateway)
Metric: 1

With this configuration i can't ping any of my Lan ip's. But it's seems that
i have the correct ip:

the ip for my remote client:

ip: 192.168.0.164
subnetmask: 255.255.255.255
gateway: 192.168.0.164
dns: 192.168.0.11 (is my lan dhcp)
wins: 192.168.0.11 (is my lan wins)

what i'm doing wrong?

PS: enable ip routing is checked


"Bill Grant" wrote:

If you set the RRAS server to use DHCP, the RRAS server leases a batch
of addresses from DHCP to use as its address pool. The clients do not get
their network config directly from DHCP, but from the RRAS server as part of
the PPP setup. Since these addresses come from your DHCP server they are in
the same IP subnet as your LAN machines.

To put the remotes in their own subnet you use the static address pool
instead. Set up a pool of addresses in another IP subnet (say 192.168.21.1
to 192.168.21.20). The inernal interface in RRAS and the client(s) will now
get IP addresses in this subnet.

To route between the remotes and the LAN you need to enable IP routing
on the RRAS server. You might also need extra routing on the LAN if the RRAS
server is not the default gateway of your LAN.

"Tiago" <Tiago@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B23E79F1-E85E-4296-9B21-365475435297@xxxxxxxxxxxxxxxx
Thanks for your answer bill....

so my question is, how can i put the remote users in their own
IP subnet and route this subnet through the VPN server ??

My network ip is 192.168.0.X and my VPN Server have 2 ip's on for external
and one for internal...

can you help-me? thanks again





"Bill Grant" wrote:

A remote access connection (dialup or VPN) just gives you an IP
connection between the client and the server. If you can ping the server,
your VPN connection is working.

You have given your remote client an IP address in the same IP subnet
as
the LAN machines. This is called on-subnet addressing. Networking to
machines on the LAN depends on the VPN server doing proxy ARP on the LAN.
The VPN server acts as a proxy for the remote machine, sending the
packets
across the point-to-point link. Some switches do not handle this very
well.
If this is your problem you will need to put the remote users in their
own
IP subnet and route this subnet through the VPN server (ie off-subnet
addressing).

"Tiago" <Tiago@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:1A19E527-D753-4E55-B0AE-20C66B3225AB@xxxxxxxxxxxxxxxx
But Why i can't ping other computers in my network? even the dns
servers i
can't ping?

what i should do?

Thanks


"Bill Grant" wrote:

No it should not! The gateway you see is correct. The gateway
address
should be the received IP address. This indicates that the gateway
address
of the VPN client is the PPP interface, which is what you want it to
be.
Traffic which is not local will go across the PPP link. Whatever your
problem is (and you didn't say what it was), the gateway address is
not
the
cause.

"Tiago" <Tiago@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:C172E77D-F132-4CF9-8108-7B08DA6B8B82@xxxxxxxxxxxxxxxx
Goo Day to All,

I create a vpn and all configuration are ok, except the gateway

so my ipconfig /all are:

PPP adapter GMMP:

Connection-specific DNS Suffix . : tiago.loc
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-35-51-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.176
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 192.168.0.176
DNS Servers . . . . . . . . . . . : 192.168.0.11
192.168.0.11
Primary WINS Server . . . . . . . : 192.168.0.11


What is wrong is that gateway should be 192.168.0.1 and not my own
ip
address, how can i change that gateway configuration?

Thanks









.

Relevant Pages

  • Re: route trafic from external to internal adapter
    ... I am remoting into networks through PPTP and RDP and am on a subnet not ... behind o f SBS Server. ... gateway and proxy server for 192.168.30.x client computers. ... If the default gateway for 192.168.30.11 is to the RRAS router and the ...
    (microsoft.public.windows.server.networking)
  • Re: VPN Gateway
    ... The subnet mask certainly ... shouldn't be 255.255.255.255 and a gateway address is not relevant. ... The server itself will get an IP address of 192.168.21.n and the ... route is to the VPN server via the point to point link. ...
    (microsoft.public.windows.server.networking)
  • Re: VPN Gateway
    ... shouldn't be 255.255.255.255 and a gateway address is not relevant. ... The server itself will get an IP address of 192.168.21.n and the ... route is to the VPN server via the point to point link. ... server was the default gateway of your LAN, ...
    (microsoft.public.windows.server.networking)
  • Re: Help! Neophyte in the WIN2003-AD age
    ... On a LAN the existence of multiple subnets does not imply ... > Than the push to Exchange 2003, than ISA server, now to object oriented ... Should there be a Active directory server on each subnet? ...
    (microsoft.public.windows.server.networking)
  • Re: SBS two adapter setup with Netopia Router. Help Save my weeked
    ... They were not both plugged into the Netopia. ... > also using as your LAN switch. ... > internal NIC into a different subnet and you should be up. ... >>I am trying to go to a two adapter set up for the SBS server. ...
    (microsoft.public.windows.server.sbs)