Re: Can ping vpn server but not other remote resources

You say that the client machine has a local IP in the 10.0.0.0 range. Is
it using an 8-bit netmask?

If it is, it is not likely to send any 10.x.y.z packets across the VPN
link. It will regard them as local and try to deliver them directly "on the
wire".


"Andemann" <andemann@xxxxxxxxx> wrote in message
news:1175594247.381851.216920@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I have set up a Windows 2003 server Standard edition using Remoting
and remote access as a VPN server.
The client is able to connect to the vpnserver, and ping the internal
ip of the vpn server, but not any other server on the lan
Internal nic: 10.18.15.31
External nic: 200.200.166.137

The vpn client is using local ip in the 10.0.0.x range and get
assigned a 10.18.15.x ip from the vpn server

There are no ip conflicts
Attempted to connect to the internal nic using port forwading in our
router, got connected, but still unable to access the other computers
in the network

The server is connected to the internet through an inhouse router
(200.200.166.1)
Settings from Routing and Remote access
if-vpn2 properties
General: enable this computer as s router (Lan and demand-dial
routing), Remote access server
ip: Enable ip routing, allow ip based remote access and demand-dial
connections
Dynamic host configuration protocol
Enable broadcast name resolution, Adapter: LAN
PPP: all checked
ports properties - wan miniport pptp: Remote access connections
(inbound only), demand-dial routing conections (inbound and outbound)


Complete ipconfig and routingtables available at
http://andreas.ringdal.no/vpn.html

I have attempted to add a static route in Routing and Remote Access
destination 10.18.0.0
mask 255.255.0.0
Gateway: 10.18.15.31
Interface: lan

IGMP Both interfaces LAN and Internal er set to Router V3 protocol

My theory is that it has something to do with either static routes or
some other setting that blocks routing from the vpn server to the LAN.

Any suggestions?


Andreas



.

Relevant Pages

  • Re: new to Routing and Remote Access
    ... example Cisco router) which can route to the Internet and RRAS. ... Or you can modify the clients routing table, but that take more times to do so. ... Site to Site) work in an environment where the LAN clients are already configured with a default gateway which provides LAN routing and Internet access Services? ... should i do the above mentioned tasks with Routing and Remote Access as well or is there any other way where both can coexist? ...
    (microsoft.public.windows.server.networking)
  • Re: Two servers, one VPN
    ... Likewise if I type the IP address in place of the domain path. ... than for communicating with the VPN server itself? ... > Is there something I can toggle in Routing and Remote Access to enable ... > recognition of everything on the LAN? ...
    (microsoft.public.windowsxp.work_remotely)
  • Can ping vpn server but not other remote resources
    ... and remote access as a VPN server. ... Settings from Routing and Remote access ... enable this computer as s router (Lan and demand-dial ...
    (microsoft.public.windows.server.networking)
  • Can ping from external - cant access site externally
    ... and using a computer outside the LAN ... Routing & remote access is configured. ... I played around w/ the Windows ...
    (microsoft.public.windows.server.setup)
  • Re: vpn problems: lan slow
    ... And now anybody in the lan cannot ... I had to stop the Routing and Remote access and in this way ... > Assuming you have already checked in Network Connections, Advanced, ...
    (microsoft.public.backoffice.smallbiz2000)
Quantcast