Can ping vpn server but not other remote resources

I have set up a Windows 2003 server Standard edition using Remoting
and remote access as a VPN server.
The client is able to connect to the vpnserver, and ping the internal
ip of the vpn server, but not any other server on the lan
Internal nic: 10.18.15.31
External nic: 200.200.166.137

The vpn client is using local ip in the 10.0.0.x range and get
assigned a 10.18.15.x ip from the vpn server

There are no ip conflicts
Attempted to connect to the internal nic using port forwading in our
router, got connected, but still unable to access the other computers
in the network

The server is connected to the internet through an inhouse router
(200.200.166.1)
Settings from Routing and Remote access
if-vpn2 properties
General: enable this computer as s router (Lan and demand-dial
routing), Remote access server
ip: Enable ip routing, allow ip based remote access and demand-dial
connections
Dynamic host configuration protocol
Enable broadcast name resolution, Adapter: LAN
PPP: all checked
ports properties - wan miniport pptp: Remote access connections
(inbound only), demand-dial routing conections (inbound and outbound)


Complete ipconfig and routingtables available at http://andreas.ringdal.no/vpn.html

I have attempted to add a static route in Routing and Remote Access
destination 10.18.0.0
mask 255.255.0.0
Gateway: 10.18.15.31
Interface: lan

IGMP Both interfaces LAN and Internal er set to Router V3 protocol

My theory is that it has something to do with either static routes or
some other setting that blocks routing from the vpn server to the LAN.

Any suggestions?


Andreas

.

Relevant Pages

  • Re: Two servers, one VPN
    ... Likewise if I type the IP address in place of the domain path. ... than for communicating with the VPN server itself? ... > Is there something I can toggle in Routing and Remote Access to enable ... > recognition of everything on the LAN? ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: Can ping vpn server but not other remote resources
    ... and remote access as a VPN server. ... Settings from Routing and Remote access ... enable this computer as s router (Lan and demand-dial ...
    (microsoft.public.windows.server.networking)
  • Re: Problem running Configure Remote Access from Server Manager in
    ... >> I have been trying to setup the VPN server for our network and each time I ... >> run the Configure Remote Access wizard, I get the following error: ... >> Reading VPN Server Name returned OK ... >> Checking whether RRAS is already running returned OK ...
    (microsoft.public.windows.server.sbs)
  • Problem running Configure Remote Access from Server Manager in sbs
    ... I have been trying to setup the VPN server for our network and each time I ... Reading property value for enabling Remote Access returned OK ... Reading VPN Server Name returned OK ... Checking whether RRAS is already running returned OK ...
    (microsoft.public.windows.server.sbs)
  • RE: VPN Connection Error 628 and 721 over Linksys
    ... Check your VPN server is working by establishing a VPN connection to it from ... TCP port 1723 form the internet to your VPN server. ... > Security Tab: ... > Allow IP based remote access and demand dial connections ...
    (microsoft.public.windows.server.setup)
Quantcast