Re: How to Connect my Network to the Internet

This is a very broad question.

In short, you will need to turn on the router to be an IP of
192.168.19.something

If clients are statically configured with IP's - you will need to manually
add the above IP as their default gateway, and add the ISP's DNS servers.

If Dynamically configured IP addresses, you can change these settings on
whatever device (or server) is performing the DHCP funtion.

Hope this helps,
Chris


"wff10" <u31813@uwe> wrote in message news:6de6c53c720c5@xxxxxx
Hi All,
I need some Help! I have a 2003 R2 Std Stand Alone Server with 11 clients
the LAN IP addresses are 192.168.19.33-192.168.19.45. I have a DSL
router/modem with dynamic IP from the phone co. I have been told to come
out
of the DSL router to my LAN network switch. #1. If I do this, How Do I
Setup
the Twelve Computers? #2. Can I make this secure to protect the server
from
hackers?
Thanks For Your Help,



.

Relevant Pages

  • RE: DHCP: not reached by clients
    ... Based on my research, we do not need to configure the DHCP or DNS on SBS, ... Run the Change Server IP address wizard to configure the SBS IP: ... One network adapter - manual router connection to broadband ... DHCP on router and other clients. ...
    (microsoft.public.windows.server.sbs)
  • Re: Problem
    ... the remote site and see if they have the connection manager installed. ... So...whichever is easier to set up on the router. ... location B need to connect individually via VPN to the SBS server at ... server - not sure of the clients ip scheme - but I think it is ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN/RAS Access other network resources
    ... is my ADSL Modem Router Firewall. ... PPP adapter RAS Server Interface: ... > DHCP server for the LAN but VPN clients are issued IP addressess by the VPN ...
    (microsoft.public.windows.server.networking)
  • Re: DSL, Proxy and Recommendations
    ... The server is purely for development purposes. ... > changed the default SSID, changed the default channel, are not using the ... > have it on the clients systems too. ... So if I understand correctly, I could buy a LinkSys Router, plug the modem ...
    (comp.security.firewalls)
  • Re: Marina Roos......HELP!
    ... The Firewall on the lan connection of XP clients should be turned off. ... If you have ISA installed on the server, check that the firewall client is ... First let the server succeed in getting access to the internet. ... WORKSTATIONS are set to DHCP server as router DHCP is ...
    (microsoft.public.windows.server.sbs)
Loading