Re: FTP configuration with RRAS

It depends how you setup the RRAS. If you enabled the NAT, I would check the NAT services and ports. If not, I would check the filtering.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
<daniele.gregorio@xxxxxxxxx> wrote in message news:1171374467.234880.30600@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
hi all,
i'm trying to set RRAS in order to comunicate via VPN two our offices
in different places. I was able to do a nat without problems, so that
2 networks (VPN and local) can see each other from clients of
networks. till now, no problem!
well, now i need that clients can connect to a FTP situated on VPN
network. From server RRAS i can without problems, but from clients
nothing! :-(
I know that i missed some steps and for this i ask some tips to you.

Network configuration is very simple, i don't have neither proxy and
firewall..... only a router.

Thanks

Relevant Pages

  • Re: RRAS, NAT & External VPN Problem
    ... there exists a NAT router infront of the final destination address. ... (ie are the firewalls the endpoint of the VPN ... > forward the traffic to the RRAS router. ...
    (microsoft.public.win2000.ras_routing)
  • Re: Small network to Net setup suggestions.
    ... You can certainly do what you're attempting with just two NICs and a server. ... Just turn up RRAS with a NAT interface, make sure the external side of NAT ... If you want VPN, be sure to get a router that supports VPN passthrough, or better, a ...
    (microsoft.public.win2000.networking)
  • Re: nat/basic firewall
    ... From the info you posted it appears that you are running your DC as a VPN server. ... As soon as a remote user connects and the internal interface in RRAS becomes active and acquires an IP, ... I will turn of NAT and try CRM again ...
    (microsoft.public.windows.server.general)
  • Re: RRAS / ISA 2006 Compatibility
    ... RRAS does the NAT ultimately,...but ISA controls RRAS. ... Do not try to configure RRAS directly,..do it via the ISA MMC. ... ISA will remove your current VPN configuration and you can redefine it ...
    (microsoft.public.isa)
  • Re: Linksys WRT54G and Firewall software
    ... but, if you take your laptop to other networks it ... The NAT does block incoming connections. ... The XP SP2 firewall does block all incoming connections when configured with no exceptions. ... That does not explain why the computer would need another firewall from the XP SP2 FW when it is connected to other networks. ...
    (comp.security.firewalls)