How to configure for Two different IP subnets
- From: "Jeff" <jefffby@xxxxxxxxx>
- Date: Sun, 14 Jan 2007 21:07:23 GMT
Just wondering if someone can please explain how I can get two different ip
subnets working? I have been googling, reading the newsgroups, and reading
books but I just can not figure out how to make this work.
I have Windows server 2003 and here is what i am trying to setup:
INTERNET
|
LINKSYS ROUTER - PPOE CONNECTION TO DSL INTERNAL IP 192.168.1.1
|
|-WORKGROUP (WIFE AND DAUGHTER LEFT HERE (THEY WOULD KILL ME IF THIER
INTERNET CONNECTION WAS UNAVAILABLE DUE TO MY PLAYING)
|
WINDOWS SERVER 2003
DOMAIN CONTROLLER - MYDOMAIN.LOCAL - WANT THIS AS IP 10.10.1.1
DNS
DHCP - set to give out ip ranges of 10.10.1.10 to 10.10.1.20
computer connecting to domain or vpn in should get a 10.10.1.x address
RRAS - (TO BE ABLE TO VPN IN) I BELIEVE THIS IS WHERE I GET
THE SERVER NAME OF JEFF1.MYDOMAIN.LOCAL
WINS
FILE SERVER
This is where I can not get it to work, from my understanding i need two
nic cards in server.
NIC 1 - LOCAL AREA CONNECTION 1 - I believe this is the one that i set my
domain up on static IP 10.10.1.1 subnet 255.255.0.0 (no default gateway?)
under advance tabs DNS=JEFF1 10.10.1.1 alternate is given
one from my isp, WINS=JEFF1 10.10.1.1
NIC 2 - LOCAL AREA CONNECTION 2 - I believe this is the one that i set
pointing to my Linksys Router static IP 192.168.1.2 subnet 255.255.255.0
default gateway 192.168.1.1
under advance tabs DNS= 192.168.1.2 alternate given from
one from isp, WINS=192.168.1.2
When configuring the Domain Controller, DNS, DHCP, RRAS, and WINS I just ran
the wizards and went with the settings it provided but when all was said and
done it would not work. I could not see anyone on the 192.168 network,
could not get to the Domaine from the 192.168 network. Active Directory
freaked out on me to where I could not even access it it just kept saying
there was an error. It was like it was not seeing the JEFF1.MYDOMAIN.LOCAL
server for some reason.
Any way I played with so many settings that I could think of from reading
the books or some articles i found on the web that i completely hosed it.
So I reformatted the drive and reloaded windows server and have left it
there before adding any roles or anything untill maybe I could get some help
in understanding what settings I need to make and where. Like I said I have
been searching found alot kind of referencing what I am trying to do but as
of yet been able to find anything that kind of explains step by step or
shows examples of what the settings are suppossed to look like. Only thing
I can figure out is this must be so easy that there does not need to be any
explainations on the settings, but for the life of me I can not figure it
out.
So if anyone could kindly explain how/what to set this up or knows where
there is a pretty good detailed guide that I could follow I would appreciate
it.
Thanks, Jeff
.
- Prev by Date: Rollout of QuickTime over the Network
- Next by Date: Re: How to configure for Two different IP subnets
- Previous by thread: Rollout of QuickTime over the Network
- Next by thread: Re: How to configure for Two different IP subnets
- Index(es):
Relevant Pages
|
Loading
