Re: Dual NICs on Server 2003 issue

The OUTSIDE Nic is the Internet. The inside is the local network which
connects via another gateway to a remote site that is on a 10.0.1.x subnet.
Should I: Delete the default gateway on INSIDE and then "route add 10.0.1.1
mask255.255.255.0 192.168.87.1" on the server?

What is the right syntax for the route add as I am connecting to the
192.168.87.x network INTERNAL then via the 192.168.87.1 gateway to the
remote site which is on gateway 10.0.1.1?

"Bill Grant" <not.available@online> wrote in message
news:%23UFLxwQEHHA.4112@xxxxxxxxxxxxxxxxxxxxxxx
You cannot have different gateway settings on the NICs. The only
default gateway setting should be on the outside NIC pointing to the
router. The gateway setting on the inside NIC should be blank.

"Robert L [MVP - Networking]" <noreply@xxxxxxxxxxx> wrote in message
news:O7%23%23BZMEHHA.3520@xxxxxxxxxxxxxxxxxxxxxxx
We need more details to help. Since you setup two gateways, can we
assuming you have two internet access? Or what do 192.168.1.1 and
192.168.87.1 connect to ?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"PGPhantom" <pgphantom@xxxxxxxxxxx> wrote in message
news:OaayA0LEHHA.4808@xxxxxxxxxxxxxxxxxxxxxxx
I have a bit of a connundrum in configuration that I am unable to resolve
and would appreciate any help. On a new Windows 2003 server which is a
stand alone server in an existing AD domain we have 2 NICS installed.
The
settings are as follows:
OUTSIDE: IP 192.168.1.2, Subnet 255.255.255.0, Gateway 192.168.1.1.
INSIDE: IP 192.168.87.153, Subnet 255.255.255.0, Gateway 192.168.87.1

They are configured that way because we have people accessing the server
remotely to set up software so the outside NIC is connected to a router
and
then a cable modem. The inside joins it to the domain where users are
accessing the server. We have a remote site that has VPN set up to the
site on the 192.168.87.x subnet. When the OUTSIDE is enabled, the remote
site cannot ping the 192.168.87.153 IP - It times out. If I disable the
outside they can ping it without issue. I have changed the configuration
around, removing gateways, settng the INSIDE as primary etc but to no
effect. As it currently stands, If I disable the OUTSIDE, everything
works
but the software developers cannot RDP in. If I enable it, the
developers
can come in, local users can connect without issue but the remote site
cannot?

I assume that I might have to add a static route somewhere but just
cannot
get the right configuration? If anyone has any expertise in this area I
would greatly appreciate the help.





.

Relevant Pages

  • Re: Dual NICs on Server 2003 issue
    ... The OUTSIDE Nic is the Internet. ... connects via another gateway to a remote site that is on a 10.0.1.x subnet. ... 192.168.87.x network INTERNAL then via the 192.168.87.1 gateway to the ... > stand alone server in an existing AD domain we have 2 NICS installed. ...
    (microsoft.public.windows.server.networking)
  • Re: Changing default gateway from the command line (fc3)
    ... The box has 2 NICs with a default gateway set up to go through ... > the NICs onto the same network as the 192.168.1.1 machine. ... allows direct access for us without going through that firewall. ...
    (uk.comp.os.linux)
  • Re: 2003 DC Multihomed - 1 Nic wont answer - help!!
    ... No no nat, internally on the lan there is no problem, with the gateway ... gateway is pointed at my internal network gateway through the appliance then ... Are both NICs on the same subnet connected to the same physical network? ... Have you installed NAT on this server? ...
    (microsoft.public.windows.server.networking)
  • Re: 2 Nics and 2 subnets traffic configuration
    ... What are you trying to ping on 192.168.2.x network? ... Can you ping default gateway? ... > Are the NICs setup correctly? ...
    (microsoft.public.windows.server.networking)
  • Re: [SLE] connection redundancy
    ... which is the router just this side of the ... >>because it's own gateway is still up. ... You'll also need three network cards to put into this Linux box. ... your internal LAN can route packets to the Internet. ...
    (SuSE)