Re: Windows networking issue

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Alright, I think I understand what happened. The machine on B network that
doesn't have a gateway assigned won't respond to a ping request from a
network and vice versa. After I configure every host with proper gateway,
everything works. Why does a machine need a gateway to respond a ping
request? Since the routing has been enabled, I thought windows server will
be able to deliver the request to the network that attaches on both network
with proper ip and subnet mask assigned. I am not familiar with routing, is
there any good resources you can give me for reading.

Thanks,
Alan


"Doug Sherman [MVP]" <nodspamherman@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:%2326g2j$4GHA.1196@xxxxxxxxxxxxxxxxxxxxxxx
1. Check firewall and/or security software settings and make sure they
are
not set to block ping.

2. Check default gateways and/or static routes on any machines which do
not
respond to ping. These machine must have a valid route back to the ping
source machine.

Doug Sherman
MCSE, MCSA, MCP+I, MVP

"Alan Siu" <alansiu@xxxxxxxxxxxx> wrote in message
news:#iKYbN$4GHA.3604@xxxxxxxxxxxxxxxxxxxxxxx
Hi,

Thanks for replying. I did what you said by enabling RRAS LAN Routing
only.
I have a pc with ip 198.168.30.21 and GW 192.168.30.10 (The 2nd NIC on
the
server). I was able to ping one machine on the 192.168.0.X network
(192.168.0.107) after enabling the router but not the others. Strangely,
The
pc with ip 192.168.0.107 can ping back to 192.168.30.21, but not the
other
machine on 192.168.30.X network.Why? am I missing something?

Thanks,
Alan

"Doug Sherman [MVP]" <nodspamherman@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:OWneFg%234GHA.3404@xxxxxxxxxxxxxxxxxxxxxxx
You need to do 2 things:

1. On the server enable routing. You can do this with RRAS or edit
the
registry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

Set the value for IPEnableRouter to 1.

2. The machines on the 192.168.0.x network need a default gateway of
192.168.0.10; or configure a static on the 192.168.0.x machines:

route -p add 192.168.30.0 mask 255.255.255.0 192.168.0.10

Doug Sherman
MCSE, MCSA, MCP+I, MVP

"Alan Siu" <alansiu@xxxxxxxxxxxx> wrote in message
news:u7X6tS#4GHA.4832@xxxxxxxxxxxxxxxxxxxxxxx
Hi,

I have some windows networking question that I am not sure if it can
be
done.

I have a windows 2003 server that has two NIC cards.

First NIC has an ip 192.168.0.10 mask 255.255.255.0
The second NIC has an ip 192.168.30.10 mask 255.255.255.0

The First NIC card connected to a A switch that has 192.168.0.0
network.
The Second NIC card connected to a B switch that has 192.168.30.0
network.

From a PC connected to B Switch with static ip 192.168.30.11 mask
255.255.255.0 and gateway 192.168.30.10, I was able to ping both ip
address
on the windows 2003 server, but if I tried to ping any PC on the
192.168.0.0
network (ex. ip 192.168.0.100), I won't be able to ping them.

I am not too familiar with routing, and I want the network stay that
way
and
don't want to add any additional euqipment to the network. How can I
make
any PC on the B switch to connect to any PC in the A switch? Do I need
to
add a route or something to the PC on the B switch in order to make it
work?
If yes, then can you show me how? Thanks a lot.

Thanks,
Alan










.

Relevant Pages

  • Re: AIX 1.3 Failures and Fables
    ... DESTINATION GATEWAY FLGS REFCNT USE INTERFACE ... Is my interpretation of the AIX 1.3 #man route correct? ... Manually manipulates the routing tables. ... Is the destination host or network. ...
    (comp.sys.ibm.ps2.hardware)
  • Re: AIX 1.3 Failures and Fables
    ... I don't know if 1.3 has SMIT or its equivalent but there should be some way to add a default gateway which is your router. ... Is my interpretation of the AIX 1.3 #man route correct? ... Manually manipulates the routing tables. ... Is the destination host or network. ...
    (comp.sys.ibm.ps2.hardware)
  • Re: RRAS Routing Problems
    ... erroneously routing through the DSL router. ... How to Setup Windows, Network, VPN & Remote Access on ... -All clients default routed to the RRAS Server ... 192.168.1.29: Cannot ping 192.168.2.29 ...
    (microsoft.public.windows.server.networking)
  • Re: Network connectivity between FreeBSD and Linux
    ... > When I ping from my FreeBSD to the FC2 box, ... > are never making it to the network cable - is my network card ... > to set the IP and netmask - no errors were reported. ... Did you set a gateway in /etc/rc.conf? ...
    (freebsd-questions)
  • Re: Mshome is not accessible
    ... Windows Network, and select the workgroup I get: ... Mshome is not accessible. ... All computers are running Windows XP SP2 and are members of the MSHOME ... Computer A can ping using ping hom100fr001. ...
    (microsoft.public.windowsxp.network_web)