Re: Help !!!!!!! DHCP IP not enough - Urgent Urgent

I have a Cisco 1721 with two 4-port interface , please advice how can
setup.

Thanks
Jackie Wong
"Neteng" <neteng.ccie@xxxxxxxxx> wrote in message
news:%23WSt7z2yGHA.4576@xxxxxxxxxxxxxxxxxxxxxxx
Your gateway has to be on the same subnet. You'll need a router or another
NIC in your server (w/IP routing).

"ITCOM" <itit@xxxxxx> wrote in message
news:%23PMABAyyGHA.1256@xxxxxxxxxxxxxxxxxxxxxxx
is same as 10.5.1.x default gateway, because our firewall gateway install
on
10.5.1.x subnet. pls help, current our IP range not enought to use.

Thanks
J
"Neteng" <neteng.ccie@xxxxxxxxx> wrote in message
news:OooulbqyGHA.1292@xxxxxxxxxxxxxxxxxxxxxxx
What's your Default Gateway for the 172 network?


"ITCOM" <itit@xxxxxx> wrote in message
news:ugvt%23UlyGHA.4392@xxxxxxxxxxxxxxxxxxxxxxx
Our network DHCP IP not enough, I want expend our network IP range. I
have
read MS KB, the DHCP supercope can be help my problems. But before
config
our W2003SP2 server, I want to know more information.

Currently Network sturcture.

-All PC / server connect to one subnet - 10.5.1.x
- 1 x DHCP server
- 1 x DNS server.

My propose Network structure
-All PC server still connect to same subnet
- 1 x DHCP server using superscope apply two DHCP range.
- 10.5.1.x only connect to server / Printer
- 172.1.0.x only connect to user deaktop
- 172.2.0.x only connect to another department.

I try to config the scuperscope in my testing lab, but 10.5.1.x is
ping
to
10.5.1.x lan server ip, but if get 172.x.x.x ip cannot ping 10.5.1.x
server
IP and cannot connect to internet.

Can you help me advice me how to config our DHCP server to serve
mutilnet.

Thanks
IT










.

Relevant Pages

  • Re: vpn 800 (so many people, so much research)
    ... I copied a "proper" config from my office. ... the server and public IP. ... have on occasion had to blow out and reinstall the dhcp settings. ... Connection-specific DNS Suffix. ...
    (microsoft.public.windows.server.sbs)
  • Re: DHCP IP lease renewal ok, but a new PC can not obtain an IP ("An e
    ... I guess the problem seen with DHCP from PC's is a symptom of another ... Note that both robert and tina are blade servers within the save blade ... Connection-specific DNS Suffix. ... I.e. DNS servers has their own IP as the first DNS server and another as ...
    (microsoft.public.windows.server.networking)
  • Re: SBS 2003 Misconfigured?
    ... DHCP shows up on the server as running. ... The netgear has a setting for the Internet IP which is set to the ... Which, based on the configuration you gave, is part of the problem. ...
    (microsoft.public.windows.server.sbs)
  • RE: DHCP
    ... SBS stops leasing out IP addresses. ... to DHCP. ... Administrative tools ' Server Management. ... go into the ISA console to create and apply a Firewall access rule with the ...
    (microsoft.public.windows.server.sbs)
  • Re: Application Hang
    ... Do not run 2 DHCP servers together, that will create conflicts for the client. ... Under DNS management console is the server listed under Forward lookup zone, if yes with how many entries and which ones? ... I hope this is what you were looking for by way of scope options: ...
    (microsoft.public.windows.server.networking)