Re: Non-windows client cannot browse Win2003 server

Bill Grant wrote:
Check that Netbios over TCP/IP is enabled on the new server. (Advanced TCP/IP settings | WINS tab).

Hi Bill

It was not enabled (it was by default, as per DHCP).
I enabled it, but I still can't browse the Win2003's shares from my scanner.

Do you have another idea ?

Regards
--
Arnaud
.

Relevant Pages

  • Re: ...OS is Win 2003 Std...
    ... But if the last message is that DHCP entered the running state, ... If you right click DHCP-server, tab Advanced, Bindings. ...
    (microsoft.public.windows.server.sbs)
  • Re: Good Wireless Connection Manager?
    ... >> laptop to have a pre-determined IP. ... It defaults to dhcp. ... manually change the TCP/IP settings and reboot when changing from ...
    (alt.internet.wireless)
  • Re: Why is DHCP table empty on Linksys router
    ... > web-based config screen for 198.162.1.1 and I go to Status tab and Local Area ... > Network and click the DHCP button, there are no machines listed in the table. ... Do you *know* for a fact that it's using DHCP? ...
    (comp.os.linux.networking)
  • Re: Cant bind to INTERNAL LAN Subnet
    ... known issue/limitation? ... Thx ... "Bill Grant" wrote: ... > reserve that group in the DHCP scope if you are worried about overlap. ...
    (microsoft.public.win2000.ras_routing)
  • Re: Wireless not working
    ... entered details on the "Alternate Configuration" tab. ... In XP you should not be able to set both DHCP and Static Address, if using DHCP when you go to Advance Tab you should not be given the option to add a Static address. ... Try resetting the Internet Protocol. ...
    (alt.internet.wireless)