Re: Cable and Router AARGH!!!!

The problem is fixed. The router needed to have a firmware upgrade.
"Mike Lowery" <selfspam@xxxxxxxxxxxxxxxx> wrote in message
news:Oqf1yjppGHA.4196@xxxxxxxxxxxxxxxxxxxxxxx
Normally the DHCP server is running on the router, not from another device
on your network (Win2003 in this case.) And you never want two DHCP
servers running on the same LAN.

You can verify whether it's a DNS issue by using IP addresses instead of
domain names. For example, instead of using "ping www.google.com" use
"ping 216.239.37.104". If you get a response from the latter but not the
prior then it's a DNS issue. Otherwise it's a routing/connection issue.

You can also try to ping your static Internet IP address from an outside
client (one of us could try.) If that doesn't work then your router isn't
even visible on the Internet.

"Candace Sparks" <consultants1@xxxxxxxxxxx> wrote in message
news:9N6dnfB1fpZnUijZnZ2dnUVZ_vmdnZ2d@xxxxxxxxxxxxxx
We decided to get a static IP address because we have a VPN set up
between two locations, and were having problems when the IP address
changed.
We are using a static IP address through Qwest and the other location,
and have not had any problems.

I did have the fixed IP address in the router. The ISP asked me to set
it up to Automatic DHCP amd the static IP address would be be picked up
by the router. Either way, the internet cannot be accessed.

Te workstations look to the local server for DNS, and get ip addresses
from the Server. I have set up networks the same way , and have not had
any problems.

The laptop does not have athe fixed IP address, it is getting it through
DHCP.


"CJT" <abujlehc@xxxxxxxxxxx> wrote in message
news:44B5C48A.8070406@xxxxxxxxxxxxxx
CJT wrote:

Candace Sparks wrote:

We are running a windows 2003 server network with a Linksys router and
cable modem. A few days ago, the Internet went down, we were able to
get it online again, but it dropped again. We decided to get a static
ip address from our provider. We have not been able to get on the
Internet since. I talked with Linksys, and they said it was a DNS
problem with the provider. The provider thinks it is the router. I
tried another router with the same results. I can ping the static IP
address and teh gateway, but cannot ping the ISP's DNS servers or any
ip addresses on the Internet. I am very frustrated!!!
The ISP can see the Cable Modem, and if I connect directly to the
Modem with my laptop, I am able to get on the Internet. If I try to
get out with my laptop going through either router, no Internet.
Help!!!!

The server is running DNS and DHCP!

Does anyone have any ideas!

Thank you for your help in advance!!!

Candace Sparks

It sounds like you have the router(s) set up wrong. You probably want
the router to have the fixed address as its WAN address (why you
decided
to go with a fixed address is beyond me -- it's probably not worth
whatever extra you're paying for it unless you have a specialized need,
and if you did, you'd know about all this), and then provide local
addresses to the laptop, etc. via LAN-side DHCP. You also need to
figure out who is responsible for login protocols (e.g. the cable
modem,
the router, or the laptop) and make sure all the devices honor that
decision.

If you've set your laptop to the fixed address when the router is in
the tree, that's your problem -- you don't understand what a router is
for.


BTW, are you by any chance running ICS? And what does your network
topology look like?

And how are DNS and DHCP configured on the W2003 server?

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che...@xxxxxxxxxxxx






.

Relevant Pages

  • Re: Urgent! New router and big disaster
    ... The SBS DNS server, running on ... its IP it means that your problem is now DNS. ... forward ports to it reliably in the router. ... I should have been more clear about internet connection.. ...
    (microsoft.public.windows.server.sbs)
  • Re: How do I configure SBS 2003 as a DHCP server?
    ... To disable the private "LAN" side DHCP service (not the DHCP service on the ... of the PPPoE adapter and enable your Speedstream as a DSL modem and router. ... For the Vista computer to interact with SBS, ... Windows Small Business Server 2003: ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... I checked the binding order and the Server Local area connection is at the top. ... I should have been more clear about internet connection.. ... I wonder if I may have missed a firewall setting on the router as well. ...
    (microsoft.public.windows.server.sbs)
  • RE: Small network with lots of features, questions
    ... Your network sounds overly complicated to me. ... to get to the internet. ... To do that, without using your server as a router, you need ...
    (microsoft.public.windows.server.networking)
  • Re: Urgent! New router and big disaster
    ... I checked the router, I am running a laptop off of it so I can post. ... Les Connor [SBS Community Member - SBS MVP] ... make sure the DHCP Client Service is running on the server. ... First Page of the Internet Connection Wizard, ...
    (microsoft.public.windows.server.sbs)
Loading