Re: "Multiple connections,etc."
- From: "Mike Hyndman" <mike@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 12 Jun 2006 15:01:34 +0100
"Robert L [MS-MVP]" <noreply@xxxxxxxxxxx> wrote in message news:ub2pVB%23iGHA.4344@xxxxxxxxxxxxxxxxxxxxxxx
Also in the server, restart server service and delete all connections in the client by using this command line: "net use * /d". Can you access it now? Please post back with the result.
"Robert L [MS-MVP]" <noreply@xxxxxxxxxxx> wrote in message news:ub2pVB%23iGHA.4344@xxxxxxxxxxxxxxxxxxxxxxx
Also in the server, restart server service and delete all connections in the client by using this command line: "net use * /d". Can you access it now? Please post back with the result.
Bob,
Tried again today to connect to the domain but instead of the Multiple connections error, It threw up "Access Denied" instead. I ran the above command and got a "system error 67", I checked this out on your website and the bits that do apply to this situation are covered.
regards
Mike H
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Elguapaul" <elguapaul@xxxxxxxxx> wrote in message news:1149866898.899612.263270@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Mike Hyndman wrote:
> I've just installed a WS2003 on a server to act as a DC for a network of ten
> XPPro PC's. They are currently networked peer to peer through a switch and
> the network is called "Workgroup" and they all have have unique names and
> can see each other in view workgroup computers in my network places. (Or
> they could until I promoted the server)
> I have created the first user account on the server, but when I try to
> connect any one of the workstations to the domain with this user name and
> password, I get the following error message;
> "Multiple connections to a server or shared resource by the same user, using
> more than one user name are not allowed. Disconnect all previous connections
> to the server or shared resource and try again"
> I've read somewhere that I need to change the name of the workgroup(on the
> workstation) to the same name as the domain, log out and then change it back
> again,
> this can't be correct surely? It would be ok on a few PC's but what about a
> few hundred?
> TIA
> Mike H
What are the steps you are taking to add the pc's to the Domain?
--Elguapaul
- References:
- "Multiple connections,etc."
- From: Mike Hyndman
- Re: "Multiple connections,etc."
- From: Elguapaul
- Re: "Multiple connections,etc."
- From: Robert L [MS-MVP]
- "Multiple connections,etc."
- Prev by Date: Loosing Network Connection
- Next by Date: VPN client disconnect - Eventid 20194
- Previous by thread: Re: "Multiple connections,etc."
- Next by thread: Re: "Multiple connections,etc."
- Index(es):
Relevant Pages
|
