Re: servers on different subnets cannot see all other computers in

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

No, see my other post. Something is blocking NetBIOS, most likely
a router or firewall in each subnet. This prevents the SMBs from
creating a NetBIOS session with the remote SMBs in order to propagate
the browse list.
"Mark R." <MarkR@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:
OK here is some additional info from a test I ran.

The parent domain is in NY and we also have a child domain here is NY as
well. We kinda did the single foraet empty root approach. These two
domains
are on the same subnet 10.100.0.0/16. Everything communicates perfect b/c
it's the same subnet no router/VLANs separate the two.

I put a laptop from the child domain on it's own subnet 10.200.0.0/24. I
have a router to separate the two subnets. I setup WINS on the child
domain
and pointed the laptop to it, rebooted and all the domains show up in
nethood. I can ofcourse connect to the child domain the laptop belongs and
the partent but cannot connect to the other child domain. I get not
accessible error.

So should I setup a WINS server in each domain based on this? Or should I
point everything to the WINS server in the parent domain and try to figure
out the issue?



.

Relevant Pages

  • Re: 2 NIC SBS2003R2 LAN/WAN Firewall Router Connection Failure
    ... I changed the SBS external IP settings as you suggest. ... Clients and the SBS Server can reach the router. ... may be there are some rule deny the access from some IP addresses or subnet. ... |> Two Nics, a static IP address, ISA, router ...
    (microsoft.public.windows.server.sbs)
  • Re: Routing and RRAS Problem - Pleasehelp
    ... Traffic from your "internal" subnet can get ... out to the Internet by default routing, but the return traffic will fail. ... You need to add an extra route to the Linksys router so that it knows how to ...
    (microsoft.public.windows.server.networking)
  • Re: Running out of IP addresses
    ... In fact it is pretty hard to find a hardware LAN router these days. ... I think it worth planning a second subnet at this stage as I can see the existing scope running out, even with a 'full range' on the current subnet. ... I understand that I will need to introduce a DHCP server on the second subnet. ...
    (microsoft.public.windows.server.networking)
  • Re: ntpq no longer working -
    ... what it shows the router is addressing 70.41.189.188 at wildblue, ... Where I've used the term "gateway", throughout this email, I'm ... Internet Port ... The subnet mask is used against the IP address to determine what else is ...
    (Fedora)
  • Re: How to enable communication between Two different lans (subnets)/ domains 2003 server based? Ass
    ... You need a route on the Internet ... to forward traffic for the new subnet to the internal router. ... and get it working properly on its own subnet using its own DNS ...
    (microsoft.public.windows.server.networking)