Re: Not able to reconfigure RRAS on W2K3 Enterprise!

Bill,

ISA did the configuration within RRAS for me. I just checked some settings
there!
Reinstalling ISA and RRAS did not help either!?

Herman Franssen



"Bill Grant" <not.available@online> schreef in bericht
news:OEerUhMaGHA.4548@xxxxxxxxxxxxxxxxxxxxxxx
Why did you decide to configure this directly in RRAS when you have
ISA
?

Herm wrote:
Robert,

No solution! At the moment I have configured the RRAS with static IP
pool!

Thanks,
Herman
"Robert L [MS-MVP]" <noreply@xxxxxxxxxxx> schreef in bericht
news:eJ1G75GaGHA.4548@xxxxxxxxxxxxxxxxxxxxxxx
in most case, VPN error 733 is related to DHCP server. To confirm
that, try to use static address pool, can you access the VPN? This
search result may help too.

vpn error 733 VPN Error 733 - the PPP control protocol for this
network protocol is not ... Analysis: normally, a VPN client receives
TCP/IP CP reported error 733 because ...
www.chicagotech.net/casestudy/vpnerror733.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Herm" <mighty_herm@xxxxxxxxxxx> wrote in message
news:OvhCaCEaGHA.3652@xxxxxxxxxxxxxxxxxxxxxxx
Hello everybody,

I am running a W2K3 Enterprise Server SP1 with Exchange 2003,
ISA2004,
SQL2005 and , ISS6 on it.
Also I have configured RRAS for using VPN connections through XP
clients.
All was working perfect since a week ago. I do not know what
happend but
suddenly I have the folowing problem;

when I try to make a VPN connection from a WXP workstation to my
W2K3 server
I get a 733 error.
On the Net they advise to Reinstall RASS. Well thats my question
here.
Somehow I am not able to reinstall RASS! I can disable it, but
when I retart
it the settings remain including the error!?

How can I reconfigure RRAS? Or better how can I fix the 733 error?

Hope somebody can help figure it out here...

Thanks in advance,
Herman Franssen




.

Relevant Pages

  • Re: RRAS and RDP issue
    ... While the VPN configuration was not the issue, ... > look into the basic firewall setting in RRAS. ... > expand the server tree ) then expand the IP Routing ...
    (microsoft.public.windows.server.sbs)
  • Re: Access Internet through VPN
    ... RRAS is probably not configured to route ... you can change your RRAS configuration so that the VPN ... clients get IP addresses on your local LAN subnet. ...
    (microsoft.public.windows.server.sbs)
  • Re: RRAS and RDP issue
    ... Sounds like RRAS is being configured as a VPN ... server via it's own wizard, which will bock all traffic to/from the server ... When I enable RRAS using the default configuration, ...
    (microsoft.public.windows.server.sbs)
  • Re: config VPN
    ... I find all kinds of instructions on the internet on how ... > to set up a VPN using the wizzard and from scratch, ... > up any of the configuration that is already in the RRAS. ... Doing very much configuring in RRAS separately from ISA can ...
    (microsoft.public.isa.vpn)
  • RRASWiz
    ... I have several client installations of SBS2003 Std and one Premium. ... I recently changed a site VPN access using the Configure Remote Access ... Checking whether RRAS is already running returned OK ...
    (microsoft.public.windows.server.sbs)
Quantcast