VPN Server and WIndows Firewall

Tech-Archive recommends: Fix windows errors by optimizing your registry

Hi,
I run a server with one interface to the internet. I have installed
W2003 SP1 and Firewall is activated. VPN Server is activated and runs
well. The problem is that a connected VPN client can only access the
same resources as any other internet user. I need to configure that the

VPN clients have full access to the system (different firewall settings

for the VPN clients as for other incoming requests). Any advise ?
Brgds
Frank

.

Relevant Pages

  • VPN home worker implementation
    ... network security. ... Firewall acting as VPN host which is connected to Company ... All Internet, email etc must go through Company ...
    (comp.security.firewalls)
  • Re: Using a Linksys router, should I also use Zonealarm?
    ... public internet to access corporate network. ... In the "old days" when people used to use Dial-In instead of VPN you ware ... protected by corporate Firewall -- since there was no public Internet ...
    (microsoft.public.security)
  • Re: Sometimes it works sometimes it doesnt (VPN data issues)
    ... NIC1 "Internet" is set to ... (the IP of the external firewall) and the DNS is set to ... A connection between the VPN server and the VPN client xxx.xxx.xxx.xxx ...
    (microsoft.public.windows.server.networking)
  • [fw-wiz] L2L VPN redundancy for T1 link
    ... VPN, without any routing protocol needed on the firewall. ... VPN rather than towards the internal network where the T1 router resides). ... Internet network, bypassing the firewall. ...
    (Firewall-Wizards)
  • Re: PPTP thru SUSEfirewall
    ... on the firewall itself and had quite a few firewall/routing tuning ... The firewall also has to let these packets in from the Internet ... something like "for VPN services that stop at the firewall". ... (assuming your internal server is 192.168.0.1) ...
    (alt.os.linux.suse)