Re: Remote SiteB to VPN over internet to SiteA AND Browse internet
- From: GFowl <GFowl@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 14 Mar 2006 08:19:28 -0800
Thanks for the responses.
RRAS is set up at boths sites, and commicate through VPN tunnel.
Site B route all traffic to site A, through VPN tunnel
Have new responsibilty of Network, alsways been jsut servers and systems in
the past, little new on the routing thing...
"Robert L [MS-MVP]" wrote:
Bill,.
Thank you for the detail input.
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Bill Grant" <not.available@online> wrote in message news:u2p1GkvRGHA.1576@xxxxxxxxxxxxxxxxxxxxxxx
To expand on Bob's comments, we really need to know what you are using
for Internet access at site A. To get this to work requires a site to site
(sometimes also called router to router or LAN to LAN) VPN link. You cannot
simply set this up at site B. It needs to be correctly configured at both
ends of the link. The router as site A needs to know how to route traffic
for site B through the tunnel (not directly out to the Internet).
If you have a RRAS router at site A, you can use the Microsoft RRAS
solution. Trying to configure it between different systems (ever RRAS and
ISA server) is not easy.
A routed site to site connection will do what you want. Traffic destined
for the "other" site will be routed through the VPN tunnel. Other traffic
will go out to the Internet as usual.
Robert L [MS-MVP] wrote:
> do you have windows site to site VPN? posting the routing table here
> may help.
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
> "GFowl" <GFowl@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:26C87790-63D6-4C89-977E-FF481941C0F3@xxxxxxxxxxxxxxxx
> GOAL: Want users at a remote site to be able to browse the internet
> via their
> own DSL internet connection while at the same time VPN all internal
> traffic
> to main site over WAN.
> Currently there is just the one VPN connection setup, all traffic
> including
> internet use utilixes it.
>
> 2003 Server with RRAS at Remote Site B has an External and Internal
> NICs,
> and VPN connection to Site A. Site B is our small, remote site,
> they connect
> over internet DSL connection via the VPN to access Exchange and
> other
> services on the WAN.
> I want to allow there internet access of non-local site to go
> directly out
> their own internet connection (RRAS Server, DSL Router to Modem, to
> the
> internet). They are currently pointing to a proxy server a the
> Main Site,
> Site A.
> Can't figure out how to do it on the server, any help would be
> appreciated.
> The clients at the site have the server as their default gateway.
> I know its
> probably something simple, any help or leads would be appreciated
- Follow-Ups:
- Re: Remote SiteB to VPN over internet to SiteA AND Browse internet
- From: Bill Grant
- Re: Remote SiteB to VPN over internet to SiteA AND Browse internet
- References:
- Re: Remote SiteB to VPN over internet to SiteA AND Browse internet dir
- From: Robert L [MS-MVP]
- Re: Remote SiteB to VPN over internet to SiteA AND Browse internet dir
- From: Bill Grant
- Re: Remote SiteB to VPN over internet to SiteA AND Browse internet dir
- From: Robert L [MS-MVP]
- Re: Remote SiteB to VPN over internet to SiteA AND Browse internet dir
- Prev by Date: ISA 2004 Standard Site to Site VPNS
- Next by Date: Re: Remote access to Server 2003 SP1 fails (only ping works)
- Previous by thread: Re: Remote SiteB to VPN over internet to SiteA AND Browse internet dir
- Next by thread: Re: Remote SiteB to VPN over internet to SiteA AND Browse internet
- Index(es):
Relevant Pages
|
