Re: What ports does Remote Desktop use?

Tech-Archive recommends: Fix windows errors by optimizing your registry

port 3389.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Charlie" <CBrauer@xxxxxxxxxxxxxxxx> wrote in message news:OkVuq8QLGHA.668@xxxxxxxxxxxxxxxxxxxxxxx
Howdy,

I'm trying to hide a Windows Server 2003 behind a firewall, but I want to
get to this server with remote desktop. What ports do I need to open up?

Thanks

Charles

Relevant Pages

  • Re: Windows 2008 registry keys to identify ephemerical port range?
    ... But in Windows Server 2008 the ... So My application need to identify the ehemeral port range defined by the ... So What are the relevent Registry keys to identify ... "To comply with Internet Assigned Numbers Authority recommendations, Microsoft has increased the dynamic client port range for outgoing connections in Windows Vista and in Windows Server 2008. ...
    (microsoft.public.windows.server.networking)
  • RE: Remote TCP/IP port Printing
    ... your local printers are not available in the ... session to a Windows 2000- or Windows Server 2003-based computer. ... This problem occurs because the printer port does not begin with COM, LPT, ... for redirection. ...
    (microsoft.public.win2000.termserv.clients)
  • Re: network printer is ready but error when printing
    ... Let me state again that it is a network printer directly connected to a Windows Server ... It should be 515, yet I'm confused HP JetDirect and others seem to use 9100 or others as listening port. ... [Confirm driver is working by examining the raw output] First print to file using "Keep printed documents" or "FILE:" port with the Canon driver, then use PCLReader / PostScript viewer to view the raw printout to check if it is the driver that makes bad printouts that causes the error. ...
    (microsoft.public.windows.server.networking)
  • Re: How do I setup a simple port forward on Windows Server 2003?
    ... No you do not need access to the firewall. ... Windows server 2003 is acting as the ... IP Routing> NAT/Basic Firewall> ... Enter Incoming Outgoing Port and IP of the workstation ...
    (microsoft.public.windows.server.networking)
  • Re: network printer is ready but error when printing
    ... The culprit we found is Windows Firewall (of Windows Server 2003). ... After allowing port 9100 through, ... But I wonder why there's incoming connection, shouldn't it be just outgoing as the server is provided on the TCP/IP network printer? ...
    (microsoft.public.windows.server.networking)