Re: Subnet & VLAN question

Tech-Archive recommends: Speed Up your PC by fixing your registry

Can you post a link to the product? I don't see that model.

"Sean" <sshahrokh@xxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:OMEZBjNAGHA.2320@xxxxxxxxxxxxxxxxxxxxxxx
>
> Thanks.
> I have a OmniSwitch/Router OS/R5 and OmniSwitch/Router OS/R9
> I don't think they support EIGRP unless I am wrong.
> can you help with the config?
>
> thanks
>
> Neteng wrote:
> > static routeS or a routing protocol. EIGRP would work just fine. Let me
know
> > if you need a config for it.
> >
> > "Sean" <sshahrokh@xxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > news:ulHWyHNAGHA.2984@xxxxxxxxxxxxxxxxxxxxxxx
> >
> >>yes, it is.
> >>I assume I need a static route in the switch to route all the subnets,
> >>right?
> >>
> >>thanks
> >>
> >>Neteng wrote:
> >>
> >>>Is your switch layer3? You need something to route the subnets.
> >>>
> >>>"Sean" <sshahrokh@xxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> >>>news:e0V4TiMAGHA.2256@xxxxxxxxxxxxxxxxxxxxxxx
> >>>
> >>>
> >>>>I've got a switch that setup 4 subnets.
> >>>>10.1.1.0/24
> >>>>10.1.2.0/24
> >>>>10.1.3.0/24
> >>>>10.1.4.0/24
> >>>>
> >>>>In my AD server, I have setup DHCP and the gateway for DHCP addresses
is
> >>>>pointing to .1 of each subnet. eg. 10.1.1.0/2's gateway is setup to
> >>>>10.1.1.1 and 10.1.2.0/24's gateway is setup to 10.1.2.1 and so so.
> >>>>
> >>>>I have assigned the switch to be the gateway for each subnet.
Therefore
> >>>>the switch is 10.1.1.1, 10.1.2.1, 10.1.3.1, and 10.1.4.1
> >>>>I have a firewall box which the internal address is 10.1.3.2
> >>>>
> >>>>I need to have all the subnets talk to the firewall box so it can
access
> >>>>the internet. Do I need a route in the switch? is this right setup?
> >>>>or do I need to make the gateway in DHCP point to the firewall
instead?
> >>>>Any suggestions or better solution is appreciated..
> >>>>
> >>>>Thanks
> >>>>Sean
> >>>
> >>>
> >>>
> >
> >


.

Relevant Pages