Re: SNMP Fails on Windows 2003 Server (std) DC

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

If it makes you feel any better, I have the same problem with one of
my servers after installing SP1. I have 7 servers total and it only
occured on one. The only way I could get SNMP to start and stay
started was by uninstalling it with Add/Remove Windows Components and
then reinstalling with the Windows CD. That way the old version is
installed. I'm sure this is not recommended but it's the only way I
could get it to work until I did find a solution. I still get some
errors on occasion but it stays started.
I was not able to find any other solutions. Maybe someone here will
get us one.



On Mon, 05 Dec 2005 14:07:43 +0000, S Burton
<sburton@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

>Hi,
>
>we have a number of Windows 2003 DCs mostly HP ML350G4s and DL360G4s.
>All are recently setup with SP1 and all have SNMP installed and configured.
>On one (and only one) of these servers, an ML350G4, SNMP will not run
>for more than a second and logs :
>
>Event Type: Error
>Event Source: Application Error
>Event Category: (100)
>Event ID: 1000
>Date: 05/12/2005
>Time: 11:18:59
>User: N/A
>Computer: SCL-NW
>Description:
>Faulting application snmp.exe, version 5.2.3790.1830, faulting module
>kernel32.dll, version 5.2.3790.1830, fault address 0x00015dea.
>
>For more information, see Help and Support Center at
>http://go.microsoft.com/fwlink/events.asp.
>Data:
>0000: 41 70 70 6c 69 63 61 74 Applicat
>0008: 69 6f 6e 20 46 61 69 6c ion Fail
>0010: 75 72 65 20 20 73 6e 6d ure snm
>0018: 70 2e 65 78 65 20 35 2e p.exe 5.
>0020: 32 2e 33 37 39 30 2e 31 2.3790.1
>0028: 38 33 30 20 69 6e 20 6b 830 in k
>0030: 65 72 6e 65 6c 33 32 2e ernel32.
>0038: 64 6c 6c 20 35 2e 32 2e dll 5.2.
>0040: 33 37 39 30 2e 31 38 33 3790.183
>0048: 30 20 61 74 20 6f 66 66 0 at off
>0050: 73 65 74 20 30 30 30 31 set 0001
>0058: 35 64 65 61 5dea
>
>in the Application Log.
>
>I have reinstalled SP1, deinstalled and reinstalled SNMP, deinstalled
>and reinstalled SNMP and reapplied SP1. I have dragged and dropped files
>from a working server. I have updated the HP Insite agents to 7.4.0
>(from 7.3.0) and redone the above at least once. I have made sacrifices
>of blood at both the full and new moons and I am at my wits' end.
>
>Please can anyone offer a solution to this before my sanity goes completely?
>
>Steve Burton.

.

Relevant Pages

  • Re: W2k3 loses network connections after SP1
    ... I am experiencing the same problem with my w2k3 servers. ... have my servers with no SP1 until i finish my tests in the lab. ... >>> I've 2 DC's which can't communicate anymore after installing windows ... >>> The IPSec driver has entered Block mode. ...
    (microsoft.public.windows.server.general)
  • SNMP Fails on Windows 2003 Server (std) DC
    ... All are recently setup with SP1 and all have SNMP installed and configured. ... On one of these servers, an ML350G4, SNMP will not run ... I have reinstalled SP1, deinstalled and reinstalled SNMP, deinstalled and reinstalled SNMP and reapplied SP1. ...
    (microsoft.public.windows.server.networking)
  • Re: ts manager
    ... After installing SP1 on the 2003 server, ... SP1 version of the Adminpak on your XP client? ... > I have two windows 2003 terminal servers with sp1 installed on ... > the terminal servers throught ts manager. ...
    (microsoft.public.win2000.termserv.clients)
  • Re: Error installing VPN on SBS 2003 SP1
    ... If the value of the key is '1', it reveals the server is at SP1. ... This newsgroup only focuses on SBS technical issues. ... Error installing VPN on SBS 2003 SP1 ...
    (microsoft.public.windows.server.sbs)
  • IT Security Administrator in Bend, OR
    ... workstations as well as physical security for I/T systems. ... manages network security software and hardware. ... Extensive experience with Windows 2000/2003 servers and Exchange ... Two years experience configuring, installing and implementing VMWare ...
    (comp.arch)