Port forwarding not working

I'm using Aztech DSL 305EU router modem.
I'd setup the port forwadring both internal and external port 80
request for TCP to be forwarded to IP 10.0.0.14. But it seems like not
working as excepted. I access to the public IP: 202.188.195.11, it goes
to my modem web configuration interface rather than the web server at
10.0.0.14.

I have a question in mind. Since my modem router have web configuration
interface, when I key in the public IP or internal IP of the modem into
web browser, it will go to the web configuuration interface for me.
Even if I set the port forwarding, how will it knows all the request
made to port 80 should be forwarded to 10.0.0.14 or to the modem web
interface?

Did I have a wrong understanding on the concept?
Does anyone can guide me how to made the web server available to public
instead of the router web configuration interface.

All I need is simple:
I have a local IP: 10.0.0.4.
The router modem local IP: 10.0.0.2.
The router modem public IP: 202.188.195.11

I want those from public Internet, be able to access to my web server
at 10.0.0.4.

Anyone can guide me?


Thanks.




Peter CCH

.

Relevant Pages

  • Re: miscreant pooter Part 2: Advice gratefully received.
    ... A fortnight ago, I gave away my spare spare router modem, which I got SFP when I changed ISP and was still shrink-wrapped, to a friend. ... It seemed to have an ADSL link so after a bit of rebooting and swapping leads, I assumed it was an ISP issue. ...
    (uk.rec.sheds)
  • Ethernet ADSL Help please
    ... USB Modem to Broadband ISP works fine ... Trying to connect to ADSL via router modem 8000 is doing my head in!! ... Apparently router is not supported Apple Mac ...
    (uk.comp.sys.mac)
  • Re: TalkTalk Broadband
    ... The new modem and a mass of wiring arrived ... a Unipod I tried the network socket. ... You will have to setup the Networking side of your RiscPc, ... unless its a router modem that was supplied. ...
    (comp.sys.acorn.hardware)
  • Re: Setting hardware flow control on serial port
    ... configure and check HW flow control. ... In my modem initialization string I ... Turning on hardware flow control on the port is important in getting the modem to work properly and for best performance. ... Using the hardwired device file with hardware flow control, you should be able to communicate with the modem with the kermit ...
    (comp.sys.hp.hpux)
  • Debranded Presario Desktop Reviewed
    ... The box is a debranded Presario desktop, sold with model number TS-XN0102RS, ... which is occupied by the useless modem and one PCI-E slot. ... Ethernet port. ... useless modem card has line in only. ...
    (comp.unix.bsd.freebsd.misc)