Routing partially working
- From: Mario Acevedo-Bengoechea <MarioAcevedoBengoechea@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 12 Aug 2005 13:31:03 -0700
I have RRAS setup with 2 interfaces.
NIC 1 has 192.168.0.3 with 255.255.255.0
NIC 2 has 192.168.1.169 with 255.255.255.0
Workstation 1 has 192.168.0.2 with 255.255.255.0 and GW 192.168.0.3
Workstation 2 has 192.168.1.26 with 255.255.255.0 and GW 192.168.1.169
I also have an internet gateway with 192.168.0.1 and 255.255.255.0
I have setup a static route in the gateway to know that it can reach
192.168.1.0 through 192.168.0.3
I have setup static routes on DHCP so that workstations know they can reach
each network through the server.
The server has a static route defined to pass everything that is not
192.168.0.0 or 192.168.1.0 to the Internet Gateway.
>From workstation 1 I can ping and browse and access all of internet services
as well as all services in the workstations in it's own subnet.
>From Workstaion 2 I can access all resources in it's own subnet and I can
ping workstations in the .0.0 subnet as well as webservers in the internet.
I can't however acccess any other service. I can't browse shares, I can ping
but not brose shares from one subnet to the other.
I can access the web interface of the Internet Gateway from any of the
subnets, but I can't access anything else.
Any help will be appreciated.
Mario
.
- Follow-Ups:
- Re: Routing partially working
- From: Bill Grant
- Re: Routing partially working
- Prev by Date: Re: Unable to map network drive.
- Next by Date: Alternate Domain Controller
- Previous by thread: Give access based on location
- Next by thread: Re: Routing partially working
- Index(es):
Relevant Pages
|
Loading