Multpile Default Gateways
- From: "Todd Varriano" <viglatoni@xxxxxxxxxxxxxxxx>
- Date: Fri, 12 Aug 2005 08:47:07 -0700
OK, here's one I cannot figure out. I am running a Windows 2003 Server with
3 NICs. They are teamed using the lates version of HP Network Team. When I
go into the TCP/IP properties, configure them and save the cahnges, it gives
me the warning, Multiple default gateways are intended to provide reduncany
to a single network (such as an intranet or the Internet). They will not
function properly when the gateways are on two separate, disjoint networks
(such as one on your intranet and one on the internet). Do you want to save
this configuration?
The problem is, I only have one gateway configured. When I do a IPCONFIG,
still only one gateway. ROUTE PRINT, shows the same. Typically wouldn't be
a problem, but after a few days, my server (which is a Global Catalog
server) loses connectivity to another serer, at another site. Says, it
can't find it. I figure this is the problem. Any help?
Todd
.
- Follow-Ups:
- RE: Multpile Default Gateways
- From: Joel Dunn
- RE: Multpile Default Gateways
- From: Jason Tan (MSFT)
- RE: Multpile Default Gateways
- Prev by Date: Re: NT4
- Next by Date: Re: Unable to map network drive.
- Previous by thread: Unable to map network drive.
- Next by thread: RE: Multpile Default Gateways
- Index(es):
Relevant Pages
|
