Re: Router-to-Router VPN connects but doesn't route

Right. When you connect, check that the dd interface status has changed
to "connected". Then do a route print on both servers. The routes you linked
to the dd interfaces should have been added to the routing tables.

If the routes you set up were correct, each router now has a subnet
route to the "other" site through the VPN tunnel. Every machine in either
site should be able to ping any machine in the other site. The VPN routers
are the default routers for each subnet?

dg3274 wrote:
> Bill Grant wrote:
>> OK. There should be only one connection. You can set it up to connect
>> from either end, but once it connects there should be routing in both
>> directions.
>>
>> Have you linked the static routes to the demand-dial interfaces?
>> Do you use the name of the "answering" demand-dial interface as the
>> username for the connection? The calling router must "bind" to the
>> demand-dial interface on the answering router to activate the route.
>>
>
> Yes the static routes are linked to the demand-dial interfaces. The
> demand-dial connections are the same as the user name too. I can
> initiate the connection from either side and it is made succesfully.
> Just no routing after words.


.

Relevant Pages

  • Re: High EIGRP Pending routes
    ... eigrp interfaces comes directly from Cisco and is not that helpful. ... Their definition is "Number of routes in the packets sitting in the ... The reason for this question is that we have an EIGRP meltdown on our ... This core router has another core router attached ...
    (comp.dcom.sys.cisco)
  • Re: High EIGRP Pending routes
    ... eigrp interfaces comes directly from Cisco and is not that helpful. ... Their definition is "Number of routes in the packets sitting in the ... The reason for this question is that we have an EIGRP meltdown on our ... This core router has another core router attached ...
    (comp.dcom.sys.cisco)
  • Re: VPN site-to-site routing
    ... It sounds like your routes are not becoming active. ... When you make the connection, do both the dd interfaces ... there is a pair of Demand Dial Interfaces that matches names ...
    (microsoft.public.win2000.ras_routing)
  • Re: Fw: Re: A quagga-related issue
    ... The problem is that quagga can't know whether tunnel is down or up. ... >> relies in the fact that tun interfaces can't be removed. ... >> parses the list of interfaces to gather the connected routes. ...
    (freebsd-net)
  • Re: trouble setting up routing
    ... It is possible to have multiple default routes on a system. ... For instance, if you have two interfaces, say hme0 and hme1, you ... a host route pointing to that host 'tarox4' ist installed ...
    (Focus-SUN)