Re: Router-to-Router VPN connects but doesn't route

In your post you say you can ping the server that assigns the remote client
on the same network. Are you stating the remote server gives out an IP
address from it's local subnet? There is no need to do that, and that could
be breaking things. Your routing between sites with the VPN, not remotely
connecting (like RAS) correct?

"dg3274" <dg3274@xxxxxxxxxx> wrote in message
news:1122972916.762581.223200@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> I have a Windows Server 2003 computer on the 192.168.100.0 network in
> WA and a Windows Server 2003 computer on the 192.168.1.0 network in VT.
> Both computers use DSL to get to the Internet. I am trying to setup a
> router-to-router demand dial VPN connection between them over the
> Internet.
>
> I have setup demand-dial connections on each server and either one can
> initiate the connection and connect successfully. I have setup a static
> route on each server to route to the remote network using the
> demand-dial interface.
>
> The problem is that after the demand-dial connections connect, I cannot
> ping any addresses on the remote network. Neither side can ping the
> other network. Routing tables on both servers show a route to the
> remote network using the appropriate demand-dial interface. The only
> thing that does work is if I ping the IP address that the server
> assigns the remote client on the same network. I can tell the ping is
> working over the Internet because of the response time. It's just not
> working when pinging the remote network IP's.
>
> Any help would be greatly appreciated!
>
> Thanks!
> Dave Gray
>


.

Relevant Pages

  • Re: RDP can not logon error
    ... Tracert & Ping to dc on the same subnet as the server that is having trouble. ... No network provider accepted the given network path.. ... Starting test: CrossRefValidation ...
    (microsoft.public.windows.server.general)
  • RE: Poor XP network performance 2003 LAN
    ... We have 3 meg bonded T1 in Corp office and the network is as follows, ... when I remote VPN into the LAN I can ... pull data from shared drive on the server or shared folders on PC's. ... However if I setup a Linux or Mac OSX ...
    (microsoft.public.windows.server.general)
  • Can Not connect to IPC$ Share while processing a CCR
    ... CCM log shows the SMS server successfully connecting to the Admin$ share, but the attempt to connect to the IPC$ shares of these systems fails with an error 5. ... Logical Disk Manager Administrative Service ... Network Associates Task Manager ... Remote Access Auto Connection Manager ...
    (microsoft.public.sms.setup)
  • Re: RDP can not logon error
    ... ping and tracert to the dc in that remote site (where this system ... Tracert & Ping to dc on the same subnet as the server that is having ... No network provider accepted the given network path.. ... Starting test: CrossRefValidation ...
    (microsoft.public.windows.server.general)
  • RE: Poor XP network performance 2003 LAN
    ... We have 3 meg bonded T1 in Corp office and the network is as follows, ... when I remote VPN into the LAN I can ... I pull/push data to the server I can do it @ 350KBps and with the VPN ... OS X and even the Windows 2003 server has great performance but from outside ...
    (microsoft.public.windows.server.general)