Re: Newbie simple LAN routing problem

Go get 'em, David!

Doug Sherman
MCSE, MCSA, MCP+I, MVP

"David Hartry" <d_hartry@xxxxxxxxxxx> wrote in message
news:#pajUyYjFHA.3960@xxxxxxxxxxxxxxxxxxxxxxx
> Thanks Doug, I *get* it now. Worked straight away and I was right, I was
> missing something very stupid huh? Of course the traffic needs to get
back
> onto the test network :$ Thanks again.
>
> "Doug Sherman [MVP]" <dsherman@xxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:eTt%231OXjFHA.2156@xxxxxxxxxxxxxxxxxxxxxxx
> > The problem is that none of the 192.168.222.x machines (except the
server)
> > know where to send packets destined for the 192.168.0.x network. ie.
> > packets from the 192.168.0.x network are probably reaching
> > 192.168.222.254,
> > but that machine/router doesn't know where to send replies. The easiest
> > solution is to configure a static route on the 192.168.222.254 gateway
> > device:
> >
> > route -p add 192.168.0.0 mask 255.255.255.0 192.168.222.9
> >
> > Also, you do not need/want the static routes on the Win 2003 server.
> >
> > Doug Sherman
> > MCSE, MCSA, MCP+I, MVP
> >
> > "David Hartry" <d_hartry@xxxxxxxxxxx> wrote in message
> > news:OQHzSRVjFHA.3704@xxxxxxxxxxxxxxxxxxxxxxx
> >> Hi,
> >>
> >> All I want to do is set up a 2003 server as a LAN router between two
> > subnets
> >> (production and test networks), whatever I try it's not working, I
think
> > I'm
> >> gonna go mad soon.
> >>
> >> Here's the setup:
> >> Server 2003 with 2 NICs
> >> NIC1
> >> 192.168.222.9/24
> >> DG 192.168.222.254
> >> DNS 192.168.222.1
> >> NIC2
> >> 192.168.0.254/24
> >> DG [blank]
> >> DNS [blank]
> >>
> >> 192.168.222.0 is our production network with 222.1 = DC+DNS; 222.254 =
> >> Internet gateway
> >>
> >> Ran the RRAS wizard, selected Secure Connection between 2 private
> > networks,
> >> no DOD connections, then right-click server/properties in RRAS console,
> >> select LAN routing only.
> >>
> >> Added static routes:
> >>
> >> Interface NIC1
> >> Destination 192.168.222.0/24
> >> GW 192.168.222.9
> >> Metric 1
> >>
> >> Interface NIC2
> >> Destination 192.168.0.0/24
> >> GW 192.168.0.254
> >> Metric 1
> >>
> >> Routing from production network to test is not important (AFAIK it
won't
> >> work anyway without additional static routes on the production side
> > because
> >> the configured default GW on production machines is the internet GW,
not
> >> this
> >> router I'm configuring).
> >> However I need to route from the test network out onto the production
> >> LAN,
> >> primarily for internet access.
> >>
> >> I have a client on the test LAN configured like:
> >> IP 192.168.0.1/24
> >> GW 192.168.0.254
> >> DNS 192.168.222.1
> >>
> >> From this machine I can ping both interfaces on the Win2003 router box,
> > but
> >> none others on the 192.168.222.0 subnet.
> >>
> >> What did I do wrong? I'm sure I'm missing something stupid here :(
> >>
> >> TIA for any helpPS I accidentally posted this in the 2000 routing group
> >> first as well sorry for double-posting
> >>
> >> --
> >> Regards,
> >> David Hartry
> >> --
> >>
> >>
> >
> >
>
>


.