Re: Testing NTP on Win2003

Check the service, check the event logs, and have a PC set it's time against
the DC and verify it.

<jwgoerlich@xxxxxxxxx> wrote in message
news:1119615205.227937.253500@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> We have a Win2003 Active Directory. The DC hosting the PDC FSMO is the
> primary NTP time source for both the Windows network (by default) and
> the non-Windows servers. We are troubleshootin a few minor problems on
> the non-Windows side.
>
> How can we confirm that NTP is active on the DC? Port scans show that
> port 123 is not listening. Also, telnet'ing into port 123 fails to
> connect. Any suggestions?
>
> J Wolfgang Goerlich
>


.

Relevant Pages

  • Testing NTP on Win2003
    ... We have a Win2003 Active Directory. ... primary NTP time source for both the Windows network and ... the non-Windows servers. ... port 123 is not listening. ...
    (microsoft.public.windows.server.networking)
  • One way AD replication problem (Continued)
    ... both domain controllers. ... Used ldap to look at the GC through port 3269. ... Set the primarydc to be a global catalog server again. ... Using active directory Users and computers I deleted the computer ...
    (microsoft.public.windows.server.active_directory)
  • Re: ADAMs LDAP ports configuration
    ... SDE, Active Directory Core ... > to assign the LDAP port numbers through Active Directories ... > 2003 server but not in Windows 2000 server. ...
    (microsoft.public.windows.server.active_directory)
  • Re: RDP w/ Local Network Printer on Remote Client
    ... doing so I could list my printers in the active directory but no one could ... standard tcp/ip port along with a few other printers. ... client setup to allow the remote client to print to the local printers. ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: RDP w/ Local Network Printer on Remote Client
    ... After doing so I could list my printers in the active directory but no one could install them or even view their properties. ... we have a network printer that is connected via a standard tcp/ip port along with a few other printers. ... We have the RDP client setup to allow the remote client to print to the local printers. ...
    (microsoft.public.windowsxp.work_remotely)