Configure VP on Server 2003 with single NIC
- From: Duke Fleming <DukeFleming@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 20 May 2005 15:22:04 -0700
Can someone point me to a resource for configuring Windows Server 2003
Routing and Remote Access services on a box with a single NIC card? The
wizard will not run to completion if there is not at least 2 NIC cards.
Environment is a small shop, single 2003 server for active directory, file
and print; single LAN segement. Not going to add a second NIC with public IP
address since Internet access is managed by router managed by ISP. Router
port forwards PPTP traffic to locally assigned IP address on server NIC.
Users want to be able to access server resources remotely from home, and when
traveling.
I have tried using the custom configuration from the RRAS setup wizard,
selecting VPN and IP Routing. However, it does not allow me to go into the
Computer Management interface afterwards and set up ports, protocols, and
authentication policies as one would normally do after the wizard has run to
completion.
Thanks.
--
Duke Fleming
Systems Engineer
Fleming Associates Inc.
.
- Follow-Ups:
- Re: Configure VP on Server 2003 with single NIC
- From: Bill Grant
- Re: Configure VP on Server 2003 with single NIC
- From: Robert L [MS-MVP]
- Re: Configure VP on Server 2003 with single NIC
- Prev by Date: Re: NetBIOS over TCPIP Disabled Cannot re-enable!!!!
- Next by Date: Re: Configure VP on Server 2003 with single NIC
- Previous by thread: Inernet conection with Win Server 2003
- Next by thread: Re: Configure VP on Server 2003 with single NIC
- Index(es):
Relevant Pages
|
