Re: Routing with RRAS

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance


we need more informtion to help. for example, posting the routing table may help.
For more and other information, go to http://howtonetworking.com.

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

I am trying to set up static routes using RRAS on windows 2003 server. I have
2 NIC cards installed and an IBM NetXtreme T1000 Load Balancing NIC card. I
am attempting to make all internal traffic go through the 2 NIC cards to the
Load Balancing card. The load balancing card will be used to connect the
server to the internet.

I am trying to implement this as i believe it would make Traffic Monitoring
for 2 seperate networks.


1st NIC 192.168.2.0 network
2nd NIC 192.168.5.0 network

the load balancing NIC networks don't matter as there will be routers
inbetween the Load balancing NIC and the internet

Left LB NIC goes to router then ADSL

Right LB NIC goes to router then Supernet.

I've looked at the help in the RRAS but i don't seem to be getting the NIC/
destination and gateway working right.

Any suggestions?

Relevant Pages

  • Routing with RRAS
    ... I am trying to set up static routes using RRAS on windows 2003 server. ... NIC cards installed and an IBM NetXtreme T1000 Load Balancing NIC card. ... for 2 seperate networks. ...
    (microsoft.public.windows.server.networking)
  • RE: FC4 doesnt see NIC Cards
    ... service does not mean your network is configured properly. ... "ifconfig" command output for you? ... FC4 doesn't see NIC Cards ...
    (Fedora)
  • Re: HOWTO: Sharing a Network Connection?
    ... Two nic cards is one of the hardest ways to set it up. ... Computers networked and internet connection shared. ... I would like to know how to share a network ... > second network card to my XP PC and connected that card to my Windows ...
    (microsoft.public.windowsxp.general)
  • Re: limits on # of computers on network
    ... The limitation is really that of the network not Clarion itself. ... some with fiber optic, added new routers, new computers and/or new NIC ... The owner is tech-savvy and knows about making sure the NIC cards ...
    (comp.lang.clarion)
  • Re: SP3 error meassage Local Network Connection failed to authenticate
    ... A lot of the wireless NIC cards are having problems with their monitoring software due to conflicts ... |> places on my network but the toolbar on the bottom has the network connection ...
    (microsoft.public.windowsxp.general)