Re: NAT can't port mapping to internal website

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: David (david_at_idle.com.tw.nospam)
Date: 10/30/04 

Date: Sun, 31 Oct 2004 01:38:58 +0800

Dear all:

I think my problem was solved.

If I try telnet port 25 on my NAT server, then it can't work.

But if I try same thing on other computer which at out of my NAT, then its
work.

I'm not sure why, but looks like its work.

"David" <david@idle.com.tw.nospam> ¼¶¼g©ó¶l¥ó·s»D
:#QyyQPqvEHA.3872@TK2MSFTNGP11.phx.gbl...
> Dear all:
>
> I've create a Win2003 be my NAT, setup ICF and ICS.
>
> The client can connect to internet via my NAT.
>
> But when I create port mapping on my ICF, such as port 80,
>
> then it can't pass to my internal website.
>
> I've try other port, such as 25 or 21... etc, all can't pass to my
internal
> server.
>
> How do I do to make port mapping work?
>
>
> Many thanks for your reply!
>
>

Relevant Pages

  • Re: Open Ports
    ... I guess what Sharad was saying was that your Internet ... the NAT will make a request to open these ports on your ... NAT server. ... >in an special port used by an application witch i need to ...
    (microsoft.public.windows.server.networking)
  • Re: ISPs can easily decrease net abuse
    ... |use NAT with forwarding? ... When one of the inside systems wants to go out, the NAT device has to ... address to as it sends out the packets. ... Suppose the NAT box allocates port ...
    (comp.security.misc)
  • RE: can not direct inside network internet request to outside network
    ... Configure Windows 2000 RRAS NAT Server ... Configure RRAS NAT Service To Assign IP Addresses And Perform Proxy DNS ... When internal network clients send a request for the Internet, ...
    (microsoft.public.win2000.networking)
  • Re: Systems behind NAT - port scanning etc.
    ... external address....that service/port that can be reached externally, ... static 1-to-1 NAT...an internet user has a direct way in to potentially ... > sorry if this isn't the correct ng for NAT questions, ... > i.e. if you could establish the IP of the NAT server and a currently ...
    (comp.security.firewalls)
  • Re: How did they get past my NAT?
    ... network), I get no response, because there is no "Default host" set up ... behind my NAT, and no port forwarding for that port - if an explicit ... as I understand?), and not forwarded on the router, so there should be ...
    (comp.security.firewalls)