Re: 2003 Server as Router

From: Doug Sherman [MVP] (dsherman_at_nospam.tampabay.rr.com)
Date: 10/21/04


Date: Thu, 21 Oct 2004 12:18:48 -0400

1. If the machines on each subnet use the Win 2003 machine's attached IP as
a default gateway, then no static route is necessary. If the gateway is
properly set and computers on one subnet cannot ping addresses on the other
subnet, then most likely LAN routing is not properly configured in RRAS on
the Win 2003 machine.

2. If machines use some default gateway other than the Win 2003 machine,
then you need static routes. You can configure these on the default gateway
router or on each individual machine.

3. If #2 is the case, try this test: On a workstation on subnet x open a
command prompt and enter:

route add <networkIPofsubnet y> mask<subnetmaskofsubnet y> <IPaddressof
Win2003>

eg. If the Win 2003's NICs were 192.168.0.1 and 192.168.1.1, a machine on
the 192.168.0.0 subnet would need this command:

route add 192.168.1.0 mask 255.255.255.0 192.168.0.1

If this works, you can make the route permanent by using 'route -p add'

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Chris White" <cwhite@caw.me.uk> wrote in message
news:81d08e3d.0410210652.684dc03d@posting.google.com...
> HI All,
>
> I have been given the task to setup a 2003 server as a router between
> to internal domains on our network. I have never looked into routing
> before so am having some difficulties working this out.
>
> As I say we have two internal domains which I need to route to each
> other. These domains both sit on different subnets. I have two NIC's
> in the 2003 box one configured for each subnet. I have RRAS installed
> on the server but that's as far as it goes.
>
> From a pc on one subnet I can ping both NIC's on the server but cannot
> ping any other ip address on the opposite subnet which leads me to
> believe that I need to add static routes on the server but am not
> sure.
>
> Would be grateful for any help I could get on this matter.
>
> Thanks in advance
>
> Chris

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.779 / Virus Database: 526 - Release Date: 10-19-2004


Relevant Pages

  • Re: route trafic from external to internal adapter
    ... I am remoting into networks through PPTP and RDP and am on a subnet not ... behind o f SBS Server. ... gateway and proxy server for 192.168.30.x client computers. ... If the default gateway for 192.168.30.11 is to the RRAS router and the ...
    (microsoft.public.windows.server.networking)
  • Re: VPN Gateway
    ... The subnet mask certainly ... shouldn't be 255.255.255.255 and a gateway address is not relevant. ... The server itself will get an IP address of 192.168.21.n and the ... route is to the VPN server via the point to point link. ...
    (microsoft.public.windows.server.networking)
  • Re: VPN Gateway
    ... Your setup can only work by using the VPN server as a proxy for the remote. ... Gateway: ... With this configuration i can't ping any of my Lan ip's. ... the same IP subnet as your LAN machines. ...
    (microsoft.public.windows.server.networking)
  • Re: VPN Gateway
    ... Gateway: ... With this configuration i can't ping any of my Lan ip's. ... Since these addresses come from your DHCP server they are in ... To put the remotes in their own subnet you use the static address pool ...
    (microsoft.public.windows.server.networking)
  • Default Gateway Reverts to Old Setting
    ... Having a problem with the default gateway setting on a WinSvr2003 Std box at ... This server is on the only IP subnet at the client's main office. ... The server has two identical 10/100/1000 NICs, ...
    (microsoft.public.windows.server.networking)