Re: Server with 2 Network Cards + cannot browse domain

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Phillip Windell (_at_.)
Date: 10/13/04 

Date: Wed, 13 Oct 2004 09:01:26 -0500

ICF is for home users. They should have never included it in the "server"
version of the OS, it just confuses people. Assuming this is the server
version of the OS use RRAS's NAT features.

To handle the Nics properly run only two. Make sure the LAN Nic remains at
the "top" of the priority list. The second Nic should only have TCP/IP bound
to it but nothing else ( no MS Networking, no F/P Sharing). The priority
list is found in the properties of Network Places, then "Advanced" from the
menu at the top and then "Advanced Settings..." from the dropdown
menu,...then the list is in the upper "box",...use the side arrows to
adjust.

How the second one (Internet one) is configured depends on what kind of
Internet connection you have and what kind of hardware you use to interface
with the Line.

(Same for 2003)
299801 - HOW TO: Configure a Windows 2000 Server as a Network Address
Translation Server
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q299801

310357 - HOW TO: Configure the NAT Service in Windows 2000
http://support.microsoft.com/default.aspx?scid=kb;en-us;310357 

-- 
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
"Brian" <briandelicata@?no-spam?hotmail.com> wrote in message
news:%23ejPPtOsEHA.2316@TK2MSFTNGP12.phx.gbl...
> I reconfigured the server today and got everything working whilst
disabling
> the other two nic's. I even tried to set up the server by using the nic
> teaming but was still getting some errors when browsing the domain.
>
> Now with this setup I cannot enable ICF since it is the domain
controller -
> enabling ICF on the server results in all clients not able to access the
> server. Are there any other options (maybe by re-enabling one of the
> disabled network cards) to re-enable icf to shield it from the internet)?
>
> Brian
>
>

Relevant Pages

  • Re: ConnectComputer Problem
    ... I'm a little confused by your network configuration. ... Switch2 --- SBS Server ... switch has internet access all the time, the second switch has the client ... NICs ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... laptop plugged into port on DSL router. ... service, e-mail, and RWW is available to all users on the network. ... The server is a SBS2003 SP1 Standard box without ISA, ... of the two NICs by clicking the Advanced tabs, it won't open that box, ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot browse the network after migration
    ... the cause is the multiply NICs are all enable NetBT. ... >>> browse the network. ... >>> 189101 Understanding NetBIOS Resource Record Flags ... >>> NetBIOS setting from the DHCP server. ...
    (microsoft.public.windows.server.migration)
  • RE: How Does ISA 2004 Performs Routing
    ... Since I'm still not very clear about the network topology, ... The output of "IPconfig /all" command on ISA and an internal computer. ... >referring to routing between the 2 NICs but was referring to how the ISA ... >server itself routed to the next proxy server in the proxy chain. ...
    (microsoft.public.isa)
  • Re: Still cant connect to RWW or OWA remotely
    ... The server is a SBS2003 SP1 Standard box without ISA, ... the two NICs by clicking the Advanced tabs, it won't open that box, and ... program or service is running that might use the network address translation ... Is the Modem also your Router? ...
    (microsoft.public.windows.server.sbs)