Router using netbios over different subnets

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: PC (paulm)
Date: 10/05/04


Date: Tue, 5 Oct 2004 11:37:20 +0100

Hi,

I have 2 subnets 192.168.1.0 and 10.230.0.0. I have enabled a static route
between these networks through which I have allowed communication by 10
users on the 192.168.1.0 subnet. The subnets are in completely different
forests with no trust arrangement.

My question is if I want these clients to communicate with the 10.230
network using netbios is there any alternative to host files and wins. I
feel I'm going backwards using these tools.

Any suggestions?

Thanks



Relevant Pages

  • Re: VPN or not to VPN SBS to external pcs?
    ... "Claus" wrote: ... I have to admit changing the sub net on the remote sites is the option I ... have to change the SBS subnet, ... Home networks are normally 192.168.0.x or 192.168.1.x ...
    (microsoft.public.windows.server.sbs)
  • FW: ipfw, natd and routing question
    ... connected to our DMZ subnet, ... I use NAT to 'route' traffic from the LAN to the Internet ... I use ipfw rules to ROUTE traffic from the Internet to the DMZ subnet ... The information contained in this communication is confidential and is ...
    (FreeBSD-Security)
  • Re: I want to link 2 lans at home
    ... > have to change the least significant bit of the sub net mask. ... So that for the original poster to add the two networks ... Anyway, if the two linksys' were just routers, just changing the subnet ... puttin everything on a /22 subnet as discussed previously in the thread. ...
    (comp.os.linux.networking)
  • ERS 8600, simple setup, IP, VLANs, etc.
    ... router which has a link to the campus net. ... N leaf subnets, and the last one is the address on the link to ... The link to the campus net has the 192.168.0.0/30 subnet, ... One of the leaf networks should be connectable with a MLT ...
    (comp.dcom.sys.nortel)
  • Re: Increase Addresses
    ... Maybe he has to have a subnet larger than a /24 ... > Microsoft Internet Security & Acceleration Server: ... Do I need to change my mask on the router to? ... networks. ...
    (microsoft.public.windows.server.networking)