Re: Cannot Join Remote Workstation to Domain

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: SteveMST (SteveMST_at_discussions.microsoft.com)
Date: 09/02/04 

Date: Thu, 2 Sep 2004 10:09:04 -0700

Michael;

I went to the client and ran net view. It displayed only the machines
connected to the remote network. After attempting to join the domain, nbtstat
-c displayed the following:

NodeIPAddress: 192.168.17.100 (the address of the client)

              NetBIOS Remote Cache Name Table

    Name Type Host Address Life [sec]
------------------------------------------------------------
CLIENT2 <2E> UNIQUE 192.168.17.101 510
CLIENT3 <1B> UNIQUE 192.168.17.102 510
SERVER <1C> UNIQUE 192.168.16.2 517

CLIENT2 AND CLIENT3 are the other 2 remote clients and SERVER is the server
located at the central site.

Steve Moore

"Michael Giorgio - MS MVP" wrote:

> From the problem client open a dos prompt and run net view
> what do you see? Next attempt to join the domain and immediately
> after the unsuccessful attempt open a dos prompt and run nbtstat -c
> what do you see?
>
> "SteveMST" <SteveMST@discussions.microsoft.com> wrote in message news:
> > Phillip;
> >
> > Yes, the client and the DC are both listed in the WINS and DNS
> databases.
> > And the routers seem to be configured properly. I have already spoken
> to the
> > people that installed them about the problem and was told that the
> routers
> > should not be a cause.
> >
> > I guess I just have to keep digging. Maybe somebody else out there has
> > encountered a similar situation.
>
>
>

Relevant Pages

  • Re: RDP access from Windows ME client
    ... Try updating the client software ... Are these other machines you tested on the same remote network as the ... Jeffrey Randow (Windows Net. ... The RDP protocol component WD detected an error in the protocol ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: Remote Destop connections to a VPN network
    ... Phillip could the application.ini be used to specify that the firewall ... > The Remote Network needs to be added to the Internal Networks Definition ... >> I am using ISA 2004 and using the Firewall Client on my desktop. ...
    (microsoft.public.isa)
  • Re: site to site vpn
    ... Unfortunately you cannot have two VPN tunnels with the same remote network ... Either you make your client reconfigure the IP serie of his LAN or you may ... Then you configure your end of the VPN to cover those NAT addresses. ... I have created a site to site vpn with one of our customers as ...
    (microsoft.public.isa.vpn)
  • Re: multiple site to site vpn
    ... Unfortunately you cannot have two VPN tunnels with the same remote network ... Either you make your client reconfigure the IP serie of his LAN or you may ... Then you configure your end of the VPN to cover those NAT addresses. ... I have created a site to site vpn with one of our customers as ...
    (microsoft.public.isaserver)
  • urgent: outgoing vpn connectivity
    ... Client connects successfully. ... Remote network is on different subnet than SBS network. ... Those users can access file shares, RDP etc. ...
    (microsoft.public.windows.server.sbs)