Re: Windows 2003 local network problem

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: Gary K. Brown (anonymous_at_discussions.microsoft.com)
Date: 07/29/04 

Date: Thu, 29 Jul 2004 08:30:09 -0700

all cards have masks of 255.255.255.0 and 192.168.0.##
IPs. Yes, just one gateway configured to my internet. I
did point to the windows 2003 server (192.168.0.1) in the
PCs nic tcp/ip DNS area.

Gary
>-----Original Message-----
>Hi Gary,
>
>How is your internal network card configured? On
internal network card check
>IP and subnet mask definition. Check that your server
has same subnet mask
>as your clients do.
>
>You should also have only one default gateway configured
on server itself.
>Only network card leading to the internet (external NIC)
should have default
>gateway...
>
>I hope this helps,
>
>Mike
>
>"Gary K. Brown" <anonymous@discussions.microsoft.com>
wrote in message
>news:683e01c4757d$922de6a0$a401280a@phx.gbl...
>> I am replacing NT with 2003 new install. I have a nic
>> for my local network which has XP PCs and a nic for
>> internet. I have installed 2003 and used the role for
>> the first server process. I can get to the internet
>> fine. I cannot ping any PCs on the local network.
They
>> can ping each other but cannot ping the server. all on
>> 192.168.0.##. 2003 recognizes the 100mb network when I
>> plug in the lan cable. I am stumped. What am I
missing?
>
>
>.
>

Relevant Pages

  • RE: Internet connection via 2nd network card without ISA
    ... I understand that one of your client computer accesses Internet very slow ... Microsoft CSS Online Newsgroup Support ... Internet connection via 2nd network card without ISA ... >I have tried setting the DNS to that of the server ip 10.0.0.2 but won't ...
    (microsoft.public.windows.server.sbs)
  • Re: Long log in time
    ... you activate the second network card and attach the router to the second ... to ensure the LAN nic is at the top (I usually rename the nics LAN and ... >From your IP configs I believe your router is 10.0.0.1 and server is ... The only thing you could do with the 2nd card is to enable the SBS ...
    (microsoft.public.windows.server.sbs)
  • Re: Windows 2003 Network adapter will not receive
    ... Whilst I was replying to you, I realised that no matter which card was ... connection from the Gigabit module on the Netgear FS750 switch to the Cisco ... interim solution in place whereby the server is connected to a NetGear GS105 ... looked like the network card would sometimes go offline and then come ...
    (microsoft.public.windows.server.general)
  • RE: Clients cannot connect to the Internet
    ... The LAN card has an separate IP address from the Internet card IP address. ... The internet works well from the server. ...
    (microsoft.public.windows.server.sbs)
  • Dual Nic - Network Settings Advice
    ... with my sbs2k3 server and would appreciate any advice. ... uses the same subnet with IP 10.0.0.30....100. ... internet without having to go through the servers dual nic. ... My main concern was the choice of network card settings. ...
    (microsoft.public.windows.server.sbs)