Re: Connecting through same domain, different network

From: Apollyon (nowhere_at_loopback.edu)
Date: 06/02/04 

Date: Wed, 2 Jun 2004 16:37:37 -0600

Okay that was the problem, yes.

Once I changed the default gateway of the computer, one computer could ping
the other.

Kind of a question on the same topic ... I can connect to the computer by
saying \\netbiosname but I can't see it when I'm browsing in the Domain ...
Just curious if that's indicative of some kind of problem or just a side
effect of the NetBIOS protocol not being routable? 

--
Apollyon
"Phillip Windell" <@.> wrote in message
news:O5l8VnOSEHA.3056@TK2MSFTNGP11.phx.gbl...
> All Clients must use the "Router" as the Default Gateway. They use the IP#
> that directly faces them.
>
> Other than that you'd have to clarify "...doesn't work...".
>
> -- 
>
> Phillip Windell [MCP, MVP, CCNA]
> www.wandtv.com
>
>
> "Apollyon" <nowhere@loopback.edu> wrote in message
> news:40be4454$1_1@corp.newsgroups.com...
> > Alright, I understand that ... And that makes sense. I actually
should've
> > realized that already :P
> >
> > But the real problem I'm facing right now is that the routing doesn't
seem
> > to work.
> >
> > I enabled LAN Routing, I have the four interfaces in General (Local Area
> > Connection, Local Area Connection 2, Loopback, Internal) ... Is there
some
> > other step I'm supposed to take? The article seemed to suggest just
> enabling
> > LAN Routing was enough.
> >
> > --
> > Apollyon
> >
> > "Phillip Windell" <@.> wrote in message
> > news:uK2tiSOSEHA.2404@TK2MSFTNGP09.phx.gbl...
> > > Functinality across networks is achieved with a Router. It you don't
> have
> > a
> > > Router or haven't setup a Windows machine to act as a Router then you
> are
> > > wasting your time.
> > >
> > > 299810 - HOW TO: Configure Windows 2000 to Be a Router
> > > http://support.microsoft.com/default.aspx?scid=kb;en-us;299810
> > >
> > > In the other thread you said that one of the Networks was not supposed
> to
> > > get to the Internet.  That is accomplished by whatever device makes
the
> > > Internet possible and has no relationship to having both networks see
> each
> > > other.
> > >
> > > BUT....as I recall from the other thread,..one of your networks runs
> > Public
> > > IP#s and the other runs Private IP#s.  This means your Publicly
> addressed
> > > Network probably already see the Internet directly on its own via a
> simple
> > > Router,...that's not a real good idea but that is another topic.
Your
> > > Privately addressed Network will not be able to contact the Internet
> > because
> > > Private IP Blocks are not compatible with the Internet.
> > > Any Internet Host out there will not be able to respond back to any
> > request
> > > from a machine or device running a Privte IP#.  Private addressed
> Networks
> > > require either a NAT Server or a Proxy Server to function with the
> > Internet.
> > >
> > > As an extra measure, your Router between the Publicly addresses
Network
> > and
> > > the Internet should be configured to disallow any traffic involving in
> any
> > > way the official RFC Private Address Blocks.  These Blocks are:
> > >
> > > 10.0.0.0 -- 10.255.255.255
> > > 172.16.0.0 -- 172.31.255.255
> > > 192.168.0.0 -- 192.168.255.255
> > >
> > > It should also include 127.0.0.0 -- 127.255.255.255
> > >
> > > Thes blocks should be for *any* direction regaurdless if it is the
> Source
> > or
> > > Destination IP#.
> > >
> > >
> > > -- 
> > >
> > > Phillip Windell [MCP, MVP, CCNA]
> > > www.wandtv.com
> > >
> > >
> > > "Apollyon" <nowhere@loopback.edu> wrote in message
> > > news:40bd84b3$1_1@corp.newsgroups.com...
> > > > I want two computers that are a part of the same domain to be able
to
> > > > connect to each other, even though they're on different networks.
> > > >
> > > > This was possible, or at least seemed to be, through Windows 2000
> > Advance
> > > > Server, and I'm wondering how to do it through Windows Server 2003
> > > Standard
> > > > Edition
> > > >
> > > >
> > > >
> > > >
> > > > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > > > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > > > -----==  Over 100,000 Newsgroups - 19 Different Servers! =-----
> > >
> > >
> >
> >
> >
> >
> > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > -----==  Over 100,000 Newsgroups - 19 Different Servers! =-----
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----==  Over 100,000 Newsgroups - 19 Different Servers! =-----

Relevant Pages

  • Re: How to connect 2 windows 2003 remote domains?
    ... The remote site will operate on private addresses as your existing site does. ... Instead of having a dedicated connection between the sites, you use the Internet. ... At each site you have a DSL router whih is capable of hosting a VPN site to site connection. ...
    (microsoft.public.windows.server.networking)
  • Re: Removing ping/icmp from a network
    ... How about via the Internet? ... Because private addresses have no global meaning, ... information about private networks shall not be propagated on ... Router ...
    (Security-Basics)
  • Re: Connecting through same domain, different network
    ... All Clients must use the "Router" as the Default Gateway. ... >> Functinality across networks is achieved with a Router. ... >> Internet possible and has no relationship to having both networks see ... >> Private IP Blocks are not compatible with the Internet. ...
    (microsoft.public.windows.server.networking)
  • Re: IP address block shifting
    ... rail against it when it does not follow your preconceptions, ... Those are private addresses. ... Maybe a host using two networks both with its own private IPs is ... linksys router that Nats them out to the inet. ...
    (comp.os.linux.networking)
  • Re: Subnetting and masking
    ... Do the WANs connect via private or public routes? ... You have numerous locations that each have access to the Internet. ... A NAT router with one-one address ... You only need addressing for publicly served services. ...
    (microsoft.public.win2000.networking)
Loading